Separate names with a comma.
I have a 13438008 copperhead head gastket on a hemi anyone know where to get some?
The big studs? What do the big ones torque to ? I also have a stage 10 with brad 4s
I have a starter and would be willing to have a starter head made for you at a machine shop here localy and send it to you i can get you the shop...
How do you get ahold of les davenport ?
It has brad fours
What do you guys recomend for a 540 inch hemi 11:1 with a 1471 hh littlefield we have it at 27 now it is a pro mod running eighth mile
Brad penn is the choice of many but not avalible in my aera so we use valvoline nitro 70 we change every race and it works well
I have a lenco drive and my buddy has a bruno the pro of the lenco is the electric brake he goes trough alot of air but you must get plenty of...
If i have a groove .150 wide and .110 deep on the manifold what size o ring do i use .139 or .210
I done this at the last race and it really milked the oil i hit the mag and immediatly pulled the fuel but i guess that split second was enough...
I was told that if i shut the fuel off first and let the motor rev up then kill the mag it will damage the strips in the blower any truth to this?
Leaking the engine cold what is alowable leak down i have aboub 5 lbs more than i did last time it was 35-30% now it is 35-40% after 6 eigth...
I use two axle straps attached to the header studs with nuts and washers they are about 14 inches log and fit great on the cherry picker and the...
I already have a big and ugly but it would work a little better if it were forward just a bit
Do the spacers that move the hat forward affect the performance in any way? I could use a little more viewing aera to see in the lh lane and...
I turned the blower by hand and it was pretty hard to turn i put a torq wrench on it it took 5 lbs to turn it with one small spot that took 6 lbs...
I will The corrected altitude was about the same as before i have not spun blower yet but i will asap and let ya know i have a question about...
Update the car went 4.20 flat without changing anything it made about 24lbs of boost at 8000 rpm
Thanks for all the input!!!! It is very nice to have people with so much knowlage at my fingertips!!! I have lived my life with the idea of...
It is hihelix rotor
