Separate names with a comma.
I think I see where we might be getting crossed up. At idle, the pump pressure is low and the hat and port distribution blocks are seeing what...
Pat thanks, you bring up some good points. Yes, I have one -10 coming out of the barrel that feeds the flow meter and from there it goes to a...
My system has been flowed and it came back at 155LBS @ 8k and 173 @ 9k and that is why I had the different valves so I can check it out. Probably...
Well, there you go. I had the "Text Book" answer and Mike comes back with the "Real World" answer. I just went through this and now I have three...
Brian, As explained to me from Jim at Enderle, the pump saver is not open or avaiable to pressure until the throttle is almost all the way...
Can you use 1/4" tubing for the Bruno transbrake line or is 3/8" line required for this? This is the 200LBS line. Thanks. Tom
3 years. SFI was/is a great idea but it has turned into a money thing and has diverged from its original mission or purpose. Manufactures...
Try using this chart. http://www.rcdengineering.com/files/tech/Belt%20Length%20Chart.pdf
We run 138LBS with a converter.
I run the same setup with 12 volts and have no issues. I have run it with a slow 1.9 HP starter and 3 HP starters and it will start each time...
Thanks guys for the ideas. Went to ACD and got just the regulator, just what I wanted for $35.
I've been trying to get a 150LBS CO2 fixed regulator and have been having some issues. I have a preset 200LBS regulator from Conwinonline.com and...
Had that happen to on a BBC. Pretty sure it was detonating as the intake bolts would back out too. The engine was balanced, the crank was not...
Trevor, You can get them made at most hevy duty truck shops but I have found they don't slide as easy as Control Cables. I'd call Control...
If you have a 5" extension or longer you can get a big pulley in there. You should have a +.250 cam and if you have an RCD hub with degree ring...
May be a dumb question here but why would bearing stores sell these? To warm up bearings?
I've seen this thing, a work of art. Two piece CNC deal, lots of machine work here. Wonder what it cost new and if the price is why it didn't...
All of what has been said is true. But, if you don't care about a little extra weight, little more cost and can use the belt and pulley...
I've run 27 LBS in a BBC with O-Rings in the block and nothing done to the heads. That was with copper head gaskets too. I'd agree with everyone...
Thanks guys for all the input. Dave, thanks for the offer. I can get the tubing at Grainger at a decent price and get the flaring tool (thanks...
