Separate names with a comma.
Its in my blood, First off - I'm a fair bit offended, thanks!:mad: I do not "hang people out" on the starting line, that IS NOT how I drive....
Hey all, We recently purchased a new set of Comp Cams lifters and had one set fail 4 or 5 runs into use for no apparent reason. Rollers are...
Nitro Extravaganza 2 - Spokane Raceway Park - Spokane, Wash. August 3-4, 2007 Qualifying Pro Alcohol Dragster (TAD) 1. Mike Austin - 5.711...
Thanks Mike, as I said - any time we're around come on over if you need anything! Was good to see you out there, too bad both our dragsters lost...
I'm no expert, but what I was told is that it wasn't just to divide the air - it was to get rid of or minimize the air turbulance between the...
We've got one of those B/V's too, just haven't installed it yet. What I understood was that it has the capacity with that bigger check and how...
Ah yes, I understand now. Thanks Dean!
The results on nhra.com seem to be a bit off...wasn't Dennis Taylor running John Evanchuk to finish up the divisonal race?? A friend who's down...
Fuel shutoff Hey Danny, Could it be your fuel shutoff vibrating partially closed? We wrap the shutoff with one wrap of duct tape 1/2" wide...
Mike, You can check this by degreeing in #1 as usual, then move your dial indicator to #6 and check the timing again. You will see the...
Greg Ozubko (GOS) is awesome! He's quick and good to work with! Has done several shirts for us over the years, as well as a few renderings.
Roger is a great guy and he's driving for a great team. Yes it is an NHRA car, but they put the roots on the car for one race a year. Roger...
We have had the same problem in the past. You ouldn't believe how tight we tighten them now. Dad broke the valve adjusting wrench tightening...
We use brake parts cleaner. Spray a little shot in each boot, dump it out (but don't let it dry), push the boot on the plug. The brake clean...
It is the hardness of the bearings, but it also could be partially due to the thickness of the oil. We run Lucas oil and mix 50 and 70....
We run a thin bead the length of the foam on the manifold (top) side, a good thick bead in the corners, and go up the head with a thin bead from...
Go pick up a roll of weather stripping at your local Home Depot, or whatever store you have near that does home improvement stuff. It's not quite...
We use a black moly lube, brush-in-can made by Jet Lube. Can't recall the part number off hand, but it works great!
Bucky is tuning that deal, wow, what a run!
I don't know that there is a height that it "should" be, as I've seen fast cars with a real tall wing, all the way down to a real short wing (ie:...
