Separate names with a comma.
It would help to know what your present combo is and what you're using it in. T/D, Class, dragboat, monster truck, tractor pull. What rpm do you...
I assume that bore is a typo, that only gives you 425 inches.
If Marty is no longer there ask for Spike (James Myers) although I think about anyone that answers can help you, they always been great to deal with.
Hey Larry, Not trying to talk you into or out of anything, but just got my recent set of GRP's, 7.455" B/A series, 9 days from the phone call to...
Thank you, Dave!!!
Well thats always an option but it sounds like he might actually want to use the pieces he already has. Dave, that probably works fine on a...
Dave, Whatevers left will probably lose its cert..... FWIW, I use an S &W 1/2" adapter plate, and get it in a 2x2 blank and cut to profile your...
Mine has three detents, one for forward, reverse and neutral. I know some reversers don't have a neutral, so I guess only two would be needed.
Here's is the complete kit or you can get the loop only. http://www.rbssuperchargers.com/Store_Detail.cfm?ID=220245&InfoID=3921...
I've used a 1/4" plate to cover the mismatch on the openings using black RTV between plate and blower and original o-ring between plate and...
Yeah, that was the main suction line I was talking about, along with a 45 and a 90 degree short hard line pieces with rubber connector for the pan...
RBS sells the hard line kits for both the main suction lines and the kit for the big filter that mounts directly above the pump, not cheap but...
Hey Tony, The way I described on the phone yesterday was from the diagram I got from RBS(indirectly from Plueger) but after seeing the way...
My Bruno has two different patterns, I always thought it was for a cs-1 and cs-2, maybe a 2 and a B&J. You're already ahead of the game with the...
At the boost and compression you're talking about, I think you would be fine, just keep and eye on your bearings for any evidence of pounding, the...
Supposedly in a high rpm combo like the alky guys run, they flutter and lose seal. It kind of depends on what your usage is. I personally love...
http://www.ariaspistons.com/products/chrysler.html Need to scroll down a little until you find the B/Alky Hemi section. The chart that BB/FA...
Don't know the intake valve angle of a fat head but if you're running a fuel head, the intake valve relief in the top of a 4.187 sleeve is pretty...
How much air pressure are you running on your shift pod and is it adusted so there is full travel on the detent ring? It needs 250# ideally but a...
2 hours from the house sure sounds inviting, would definitely have to step up the program to be part of the show though. Maybe they could have...
