Separate names with a comma.
What is the part number or name for the grease used on head stud threads that everybody calls peanut butter. I know it's used in the diesel...
So where do you buy the Torco? Is Schmacher still selling Pro Nitro?
I have the same set up, Onan 6.5 generator in side my 36 ft. gooseneck. I built a wood frame with a door at one end so I can remove the generator...
I too had the same problem with Dart heads. It didn't rub that bad so we just ran it with no problems. Are the Dechellis stands you have the plus...
Maybe like some paints that sit for a while, some settling may occur?
Be sure to keep the adapter straight in line with the torque wrench. The calculation changes if you don't.
I ran a Trans Specialty flywheel behind blown alcohol hemi with a Bruno/ Lenco. It was chrome molly and had 0 problems.
Don't forget Mike Janis...
Does anybody know or can they measure the distance from pan rail to the blower locating surface on the manifold? Brad billet standard deck, aj II...
I stripped mine with automotive paint stripper and it didn't hurt the mag panel at all. Just wash down with laquer thiner when done stripping. I...
Does anybody know if the new undercoating and body release apply to nostalgia nitro F/C's too?
Do you bake the rotor or just the pads?
Hi, (step1) My name is Gary Kraus. (step 2) I used to be a drinker with a racing problem. (step 3) Now I'm just a racer... ;-)
Thanks for the help!!
Anybody know who I can send my Mallory Mag IV to for a tune up? Thanks.
Thanks for the info Dave!!
No, It has the steel rotors.
Also, when you first leak your barrel valve, and then start the motor, you will have to adjust the idle (around 1800 for blown alky). When you do...
I need to service my 9 1/2 inch Strange top loader but this is the first top loader I've owned. Is there a manual available? How do you remove the...
I tried the purple power and it worked.. a little. Not as good as I had hoped. I hit it with a couple of cans of brake clean and then the car wash...
