Separate names with a comma.
Just for clarification...we just make sure there is lash in the rocker and PB lubes them just fine....and you can see it ooze out around the...
I bought the T & C Chassis jig from Tom & Chris Hunt....and working on my first car. Their car (that I currently run) has a front tire width of...
Get the Manton valve adjusters with the holes in them and use a palm style small grease gun - give em small shot of peanut butter at the start of...
Just FYI....I talked with Ken Black the other day....and he is calling a few employees to come in to do a limited production run on block orders....
With a standard deck - Mike Cavalieri mentioned that with a 7.043" rod the compression would be around 11.3:1 and with a 7.076" rod it would be...
Not sure if anyone makes a dragster style poly tank....but Bob Massey manufactured the 7 & 10 gallon poly fuel tanks that are used in a lot of...
4.310" Bore and .100" tall block 4.500" stroke - 175 CC head. I use a 7.126" long rod - standard alcohol pistons = 10.6:1 compression because we...
I have heard that other machine shops install piston assemeblies dry like Sean mentioned...I spray em with a light coat of WD-40 as the ring...
I don't wanna keep harping on this subject....I friend in St. Loius area is having the same problem...Powerglide with 1.80 low and he changed from...
Tire Shake & Spin Mac - this is the 3rd time that I have copied and pasted this response on ITA....but it's worth saying again....might help your...
Thanks for all of the help....yup...it's from Tom & Chris Hunt....and I ordered the hoop from M/W - mandrel bent .065" - 20 11/16" inside and it...
I purchased the jig that my 125" car was built on...T & C Chassis. I'm starting to bend and tack a few tubes and want to improve things along the...
You can get a copy of the service manual from Strange - it's really an exploded view parts book with some assembly info. The tool kit they sell...
Gear Ratio I don't wanna wear this one out - but thought I should copy my response on gear ratio from a previous thread.....and it might put your...
There are a lot of other variables....but here is my experience....Lencodrive automatic with 1.38 & 1.31 for a 1.80 low in the trans and a 3.89 in...
Just to eliminate the vent issue....our New Nitro Madness AA/FA driver Sean Belt suggested that we use the "Hillbilly glug test"....pull the fuel...
We had the same problem a few years ago with a Reactor flex plate and crank adapter on a Hemi crankshaft (Lencodrive setup). A real sharp machine...
We use the Manton adjusters with the hole in the center - and give em a "pump" of Detroit Diesel "peanut butter" with a palm style grease gun at...
JT - we loved Denton and plan on coming back later this year or next spring...will also see ya at MO-KAN...Scott
Mike always has detailed (and correct) answers to any questions that I post - he has helped many of us....