Separate names with a comma.
Copy of an older post that I made...about tubing notchers.... I started with the mill - and it's a small home version - actually a Drill/Mill....
I need to know also...I have a set of AJ Purple stands with extra bolt hole (center 3) that were anodized by a previous team to match their team...
This is identical to the drawing that Richard at System One sent me when we were putting together a dry sump system...must be the proven method...
I had an awful time with the tapered ring compressors (hated them).....they would jam and cock the piston and frustrate me every time I tried to...
This response is not totally on topic, but I always avoid having any of the ring gaps end up in the intake valve notch area at the top of the...
I like the Manton adjusters with the hole in the center....just a squirt of lube (Manton also - another little plug for ITA advertiser) as you...
I pull a 38' gooseneck with a Chevy Gas Dually - no problems towing...and I considered getting a 44' and decided that stopping was the issue....so...
Miller Syncrowave 180 SD Sorry to hijack this thread, but since we are talking welders, I have a Miller Syncrowave 180SD for sale for...
Check your PM's - sent you a old post on gear ratio
Adam, one other thing I forgot to mention...my new pistons have .003' - .0035" or so taper - so the skirt is 4.300" at the top and 4.303" at the...
Hey Adam....my pistons measure 4.300" across from the pin and my sleeves are 4.310" - 4.3105" when new....I have also had some scuffing...
Just a weird question - are there ANY top alcohol funny car or dragster teams using steel rods? When we kicked a rod out at KCIR a few years ago I...
I agree with everything that Sean (altered boy) is saying....as he drives my car and makes good calls on this stuff....and we have a solid...
I have used the Manton radial groove lash locks since I built my hemi....never a problem with them....I do replace a pair of keepers occasionally...
Ours is installed the exact same way as Kenny Keller....and a Lencodrive trans.....we have a switch on the steering wheel that Sean activates just...
I got wicked flames by accidentally using solid core spark plug wires....won't try that again as we also burned a hole in the carpet under the...
I put mine in just the way Eli mentioned....on 3" mains....with the tang pushing against the cap in the direction the crank turns - and when I...
Get as much oil in there as possible....I had an oiling problem on a KB Olds a few years ago with a shallow pan (no ground clearance)....on 1/8...
www.timmcamis.com/contact_us.html or 800-980-9656
Copy from one of my previous posts...if you can use one these poly tanks: Bob Massey manufactured the 7 & 10 gallon poly fuel tanks that are...