Separate names with a comma.
When using a mag 44 will shutting off the power to the MSD 8973 mag controller shut the engine off and not harm any of the electronics are do I...
I recieved an e-mail from Zap that Gary Phillips does the recerts on the Whipple. Not sure if it's a SFI tag are something else.
Schumacher racing should have been fined points. Not listening to the officals has to be worst than oiling down a lane with a hurt engine. Stewart...
2 Step I have a whipple at 45% on a chevy with a two step set at 4000 and it works great for me. I'm not taking any fuel away but some people I...
Repair Do yourself a favor and tell Tom to send your block back to you without any repairs done. Find another place to do it. After a phone...
I wouldn't go over .060 wide with a .041 wire and .012 to .015 depth should work fine.
34* should be a safe starting point on the timing, 38* being the max. I run NGK R-5671-10 plug's in my BB Chevy's.
Anyone with a screw blower using a two step to stage the car? I noticed some Promods using them. Thanks.
Brodix We build a fair amount of BB Chevy's with up tp 38 lbs and Brodix heads. We never have any problems with pushing chambers are head...
I have a whipple on a KB-Olds style engine. When staging at 4000 rpm's the left side exhaust temp is about 400 degrees cooler than the right.1.5...
Have a solid set on my blown outlaw promod car. Good heads with a solid rocker system from T&D. If you are considering a set, give me a call for a...
I use the Edelbrock on my blown car and it works very good. Can watch and record in real time and there are plenty options in the setup for...
Back to the question, will a billet shaft last longer without cracking? I don't see a problem with the journal surface not being hard enough on a...
4.500 stroke KB Olds at 8500 rpm's with 10.9-1 and a 980A at 55%. Can I run a forged Lunati crank in this combo without problem's are is this a...
