Separate names with a comma.
Happy Birthday Bob, you're only as old as you think you are. Me, I'm 159 and still counting!
I prefer to pull, it feels like I have better leverage and control. Also if on fire on a push, you will be pushing into the fire.
Check your class requirements. For my class, Top Dragster, 1 gallon minimum which I think is the general requirement. Good luck, Paul
Dave, here's a picture of mine connected to the back of the PG bell housing. [IMG] Hope this helps.
Try THIS, it's only 3/8" thick.
Mike, has your aerodynamisist friend done any testing relating to the effect the boundary-layer has on the flow around the hat?
Mike, do you think the air entering the hat is slower than the blower? Isn't the purpose of the blower is to increase boost by increasing the...
American Nostalgia Racing Association
The air entering the hat is slower than at the lobes under any speed so there will always be some vacuum, if there isn't, the blower's not...
I could be all wet, nothing new, but, as long as the hat is connected to a blower that is turning in the correct direction, the hat, at some...
I had the same high-idle problem, around 3500, and putting some sealant between the hat and restraint-plate, and, restraint-plate and blower...
For the Top Dragster class, I received an email from Mike Rice, Div 7 Director, that said flame-retardant material is mandatory, even though my...
I had the db error again this morning, 6:30 AM or so.
I too have received the database error. And Will, if I can make a suggestion, when you move the forums to a different subdomain, can you put a...
Partel, good looking car. I looked at your video and it sounds like right at the end of the burnout, the motor is being pulled down pretty...
Dave, before I went with a smaller crank hub, I had the same problem. I changed my pump drive extension to a 6 inch one and now I have plenty of...
mbaker3, I would say to get rid of the dampener and get crank hub.
You'll have a better selection available with the 5 1/2" BC, I have 5" and had a hard time finding wheels for mine.
I don't know if THIS will help you or not.
I want to re-iterate that and also add that the wing shape determines the amount of angle-of-attack needed and how effective it works. I've...