Separate names with a comma.
Does any one have problems with timing cover and oil pan bolts coming loose on a billet block ? We ran ours this weekend and they all came loose...
is the mag drive for a std cam hemi and a raised cam hemi the same ?
Whats the proper clearance ?
Ran one on a screw blower deal it worked fine would still have it on the car but i bought a complete setup with a k valve i liked the ajustment on...
We cryoed alot of aj parts and never seen a big differance we did all of the parts including bearings we only seen improvements in valve train...
Ok so here is the run down see what ya think 500 lift cam i measured it last night and the rockers are 1.5 dont know what to think of that...
Thats what i am trying to figure out the previous measurements were from the bare head no shim to the bottom of the retainer
Sorry coil bind is 1.142 not 1.200
No spring cup brad 4 heads 2.130 from head to retainer with no shim at all springs say 2.200 installed height 1.200 coil bind valve lift...
Alright 450 seems to be alright buy what i have found it is a hemi what is the thinnest shim i can put under it to protect the head? I...
I know this has been hashed and rehashed but i have a 500 lift cam 785 at valve with 296 duration we plan on turning 9000 max my suppier sent...
My headers are double wall and very heavy but they also never give me any trouble does someone have input on a lighter header that is...
For the life of me i cant find star racing or any other builder who offers these tried mcamis and bickle does any one have a number ?
What i would like to know is what is the correct length ? I think it is with a couple of threads of the ajuster sticking out? Is this right
So to set them up correctly you cannot worry about where the rocker lands on the valve it is determined by the stand you just want about two to...
On the battery deal will the small batterys run a data logger as well as a tach andshift light ? Does someone have a number of somewhere toget...
When installing new head studs in a billet block do i put anything on the threads? Do i torque them ? Thanks in advance for answers
what about the lifters i have they look good but i have no idea how old they are or who made them can i send them somewhere to have them rebuilt ?
What do you do if they are off from each other ?
Using a bullet cam but who makes the best lifter for the money ?
