Separate names with a comma.
So what is the math that gets us the change from 20% to 28%? I'm sure I used to know this but how do we get a 6.7% change in air volume?
Fantastic post! Should be a sticky.
See the next.
Agree with that. It's surprising how much different the front and back nozzles are, like low 40's in the front two (1&2) and 60's in the back...
What he said.
Unless your setup lets them flex and you run it for a long time. Try to ensure there is a stop so they don't flex and work harden and blow early.
For sure it's not mandatory but if you are looking for maximum strength and durability it's the only way to go. If you want to street drive it...
Joe is VERY helpful. I did the same thing (buying direct) and didn't want to ask him but he even stopped by and took a look at the car. Can't go...
Agree with the two posts above. I'd probably give the nod to a solid New Century block though over the KB if you are going to buy new. You may...
There's got to be something that will sway you: Ice Cream, candy, BEER! Ha ha, just kidding. I can respect and appreciate your stance. Thanks...
Promise not to tell your wife if you tell me the secret. :cool:
Mike, how can we gauge this without O2 sensors? Is there a fast acting sensor that will live in a blown alcohol environment that can be plugged...
My Power Grid pulls it out at 0.00. I pull the same amount out for .25 seconds and then start the ramp so I wonder if that makes a difference....
From the ProMag website. "Eventually coil usage will degrade coil life or performance, unfortunately translating this into a number of passes,...
Sent a PM.
As I was saying before I can duplicate this and that was the reason for my questions. I have a BBC with Total Seal Gapless 2nd rings and Brad...
I can duplicate your issue without the gasket problems. You said you made two passes with no issues. Did the third pass smoke or did it start...
Are the intake gaskets blown or is there just oil in the intake and blowing out the exhaust? Do you have zoomies and if you do, are all eight...
The Lamb spindle uses a bigger ID bearing than the Anglia so it uses different bearings and inner seal. You can buy the Anglia spindle mount...
If you just want blue you can cover whatever you have with Moroso's Ultra 40 heat guard. It's blue and I use it over the red MSD wires. Just a...
