Separate names with a comma.
Looking to upgrade fuel pumps i can have a lil bertha i have upgraded for 600.00 or i can buy a tested enderle pump that flows what i need for...
Does anyone have avalible the manley part numbers on intake and exhaust valves ?
I was at 11.7 with roots blower what do i need to shoot for with the screw ?
I need some advise as to who to contact about a good cam to run in a hemi with a whipple ? Thanks in advance
Who makes the best gear drive for a blown big chevy that drives the pump off the cam?
I got some crane roller lifters that i need to have rebuilt who can do this ?
I have a 980 that i am going to try i ran it a few years ago and it just tore up alot of parts probably not the correct blower to learn on i...
Just put the small screws back in the rotors on my blower and one of the inserts is stripped in the rotor. Not the screw or the inner threads but...
i know it has been hashed to death but will buna o rings work with methanol ?
i have a whipple that i am thinking about trying to run for a race or two this year but i dont have time to dyno it and set up the fuel system is...
I am rumming r6061-11 stock number 2773 i have been told there is a cheaper version of this in ngk that is just as good any ideas ?
Am i correct in thinking that if i have a door car that is spinning on the top end that i need to stand the rear wing up more and put more down...
How often do i need to restrip it can i measure weather or not it needs to be and how hard is it to do ?
i have heard twom different ways to set up cam timimg center line and timing event which is better?
Does any one have problems with timing cover and oil pan bolts coming loose on a billet block ? We ran ours this weekend and they all came loose...
is the mag drive for a std cam hemi and a raised cam hemi the same ?
I know this has been hashed and rehashed but i have a 500 lift cam 785 at valve with 296 duration we plan on turning 9000 max my suppier sent...
My headers are double wall and very heavy but they also never give me any trouble does someone have input on a lighter header that is...
When installing new head studs in a billet block do i put anything on the threads? Do i torque them ? Thanks in advance for answers
Using a bullet cam but who makes the best lifter for the money ?
