Separate names with a comma.
actually its the ICS line of gasket that SCE makes that has the built in seal ring but it,s still not as good as the good old O-ring /receiver...
what other companys are making these types of units ? The hans unit is a little expensive.
Good luck with the stock 454 ,4-bolt block! I use to work on supermodified circle track cars. Those guys were about 650 to 700HP around 14to1...
Sammy no it won,t it's just like pulling 12 volts from the center terminal on some of those 3 terminal 16 volt batteries. you will only get...
Hey Dave how ya doin ,if you read the top of lorenzos' post he said that its 2 -16 volt batteries so he is putting 16 volts to the starter....
blown 1020 the fuseblock is up front and the ford solenoid is mounted on the battery box and I charge the batteries seperately.
24 volt The way I wired my car ;I use 2-12v batterys ,off the first battery the -side goes to ground,the + side goes into the cut off switch on...
rotors Lonnie ,not to dispute Mike Canter; he is always helpfull to everyone and very knowledgable but... If you go to RBS s' website and do a...
what onboard starter are you guys using? I run a smallblock chevy ,10-71 high helix SSI and a 44pro mag and need to spin the motor over faster!...
filter Spud the idea of filtering the fuel before it goes into the tank is great but if you don't filter it before it hits the nozzles and the...
filter I use the kinsler monster mesh filter and love it !
what about the donovan unit ?what has anyone seen of them? and thanks information so far!
what are the pros and cons of the different types of converter driven lencos? lencodrive ?,donovan torquelink?, bruno lenco? I'm looking for...
Mike NOS makes blue nozzles with drop in jets as well and they wouldn't have fuel inlets if you got nozzles for a "dry" system . Just trying to...
Are you sure that they aren't nitrous nozzels
bore Why would you think the 4.060 bore is better than the 4.155 ? Do you have a cube limit? By going to the larger bore you unshroud the...
Has anyone gained anything by going from a 20 to a 44 ?
kinsler G.C. you have already gotten some good advise but the first thing I would do is back off the throttle stops and unhook the crosshaft,then...
Does anyone have a phone number for the frameworks shifter company?
JP to answer your original post ,the number for SSI is 440-243-6680 they also make a top shelf blower if you can get one buy the time you need it.
