Separate names with a comma.
> The Gay Cowboy > > A successful rancher died and left everything to his devoted wife. > > She...
By the way you might want to ask Uncle Bob "Myers" how to set the toe on a staggered wheel front end, its different than a straight wheel front...
Yo, where do you find a micrometer that big??? lol lol :D as far as caster 12 to 15 is way to much because when you back up the frontend thinks...
Ken, that would be "caster" "camber" is the way the top of the tire tips in to the frame or out from the frame. being that you are on a flat...
Randy, when you made your tester did you put a flowed .040 jet in between the two gages? :D
Oops, Sorry, Never mind. Am I awake yet? :rolleyes:
Jeepers Keepers Nole, This is what I saw on the valves that broke on my brothers car, The keepers didn't touch each other when assembled there...
Quote: Originally Posted by outracer Any suggestions on who has the best titanium valves ? Running Brad stage VI heads and been using Manton...
I'll bet it nipped the tip right off at the keeper groove, yep, thats the reason. I cant believe there still offing them keepers and valves on...
Mike if that is true, and i know it is, ( less HP more Heat) why dose every one re strip there blower after a few runs? when i ran a roots I never...
The idea isn't to sealup the blower, the idea is to cool the air going into the blower, just what do you mean by solids? :confused: I'm confused...
I already answered this post once, and some A/ hole removed it, so here goes, Mike Cantor said the same thing, my answer is, If it were that easy...
Heres my problem, I never ran a high speed in the roots setup, And the screw blower car I worked on didn't need one it needed a high speed...
That a good idea too,two high speeds,one to the tank, one to the extra nozzle. thjts suggested that also, If every one jumps on this idea and...
It's like what the old maid that pissed in the ocean said, EVERY LITTLE BIT HELPS ;) if it works. P/S cool name.
Let me explain my theory better, If you come off the port nozzle block, and put the fuel in the hat by way of an other nozzle the FUEL PUMP will...
Hey Dave, Thanks for your help :rolleyes:, I went to the Hilborn site, and there they were, schematics on the fuel system, barrel valve and all,...
Dave check your p/m
Dude, ( still trying to stay young even in speech hehehe) Thats the whole point, a screw blower the more you spin it the more boost it makes,in...
I understand that, my tough was with a roots blower, after a certain point it's just pumping hot air,the idea is to introduce cold alky to the...
