Separate names with a comma.
We have a d rotor big chief chevy at 100% with converter. Launching on 2 step with air throttle limiting boost. 4100 rpm 16lbs of boost it works...
crank 4.25 is the strongest and fastest for a chevy.
shaft speed Mike i've seen shaft speed numbers thrown around a couple times and nobody ever mentions the rear gear ratio. We have numbers...
inches Fast blown stuff turns 9000rpm plus. The piston speed is too high to have a long stroke.The borespace limits the bore size. AJPE has a...
rods GRP per Bill Doucet...real happy so far. Mike
rods We were in the same boat with Brooks shutting down. The weight on the big end is more critical if it changed a lot. I know a lot of guys are...
We watch .10,.25 and .50 shaft speeds. Everybody throws numbers around to try to figure out how the car is getting up on the tire. Our old heavy...
chevy Tom I have a d rotor chevy and i'm getting ready to test next weekend. I'd love to bounce ideas off you. Mike Bruns 316-259-3883
When you say gear do you mean first gear ratio or rear gear??? ADRL performance has made gear ratios very important in the last few years. The...
plugs I thought Drazy said the 6061 had more margin before preignition. Darren Mayer said the 5671 reads a little differently but will work. We...
The only resentment I have for clutch guys is that's all there was going fast when we started running a blown converter car 10 yrs ago.LOL. We...
gear a 430-456 will work ok with the 1.80 low. I've never run a car that light but I ran a glide in a promod and the 4.56 would go 173 in the...
gear 4.56 will go fast. The glide planetary will probably be trouble if you lean on it.1.80 is stronger and the 456 will still work.
hot the big brt pan will make a huge difference on heat
block A cast KB olds or new century with cross bolts is the way to go. You can get a used longblock for what the CN costs bare. You've got billet...
block We have a KB olds with 2 studs on the front cap and run way less than normal crush on the bearings with no problems. 1471 roots with a...
creep Line lock on the front??? Our bruno did the same thing. Try pushing the car fwd with the transbrake on....it will roll due to the lenco...
lifter With so many lifter horror stories i'd say the Jesels are probably worth the money for a max effort application. I run a low buck...
lifter I have run Iskys for years and upgraded to ez roll. Got about 100 runs on and about half needed a rebuild. 400lbs/seat 9000rpm chevy.
chevy we just had our chevy combustion chambers machined. The quench area is sunk in and angled. It gained clearance but apparently makes power....
