Separate names with a comma.
MSD says to ground the heads MSD says it makes a better electrical path to the sparkplugs to ground the heads, and we do and have never had any...
50 Runs on Rods We have run one of the name brand rods you are talking about here and we run 45 to 55 passes a season on the 1/8 mile only; and...
Mallory to 44 Amp MSD Ron, when we went from a Mallory Mag to the 44amp MSD Mag, we pulled timing and burned much more fuel and went much...
Conventual Head BBC Trevor, we went a 4.04 with a powerglide in my bracket dragster with a Dart 345 headed BBC. THANKS! Jim
3:70 to 3:90 gear for that Hemi Motor The motor you have will pull a freight train to 8000rpm and then runs out, but is very low maintenance. It...
Powerglide Scott, we have run a powerglide behind a blown alcohol hemi and run 3.80s on the 1/8 mile and never any transmission troubles for over...
THANK YOU to ANDY!!! It is nice to have help from the profesionals/dealers here on ITA. Andy, my phone number is 931-580-8804 and THANK YOU so...
Littlefield Blower Serial Numbers Andy, it is a 14-71 (not sure about the Hi-helix either) Littlefield Blower and has these numbers on it. They...
Can anyone give me information as to a way to tell if Kobelco rotors are installed in a supercharger? Maybe, measurements or markings? Any help...
MSD Parts MSD sells the parts that you need in a kit for about 3 rotor rebuilds-THANKS! Jim
Locktite Bolts We do locktite our crank bolts and use the metal locknuts on the converter bolts with locktite, but still have had them loosen, so...
Reactor Flexplate We mark our crankshaft bolts with a white paint line to be able to monitor if they loosen any. The aluminum flexplate will...
Safe Timing You will be SAFE with 28 to 30 degrees of timing with the fuel heads-Jim
System 1 Filter I run the big System 1 fuel filter between the pump and the barrel valve too!
Can anyone give me a quick reference point so I can check a 92 TFX block for the standard or .100 tall deck height? Any help would be appreciated?...
Blown Alcohol Use? I was just asking about blown alcohol use, not nitro-THANKS!
Billet Cranks Will, I have 2 Bryants and a Winberg in my 3 motors, but just bought the fathead and was not told it had a billet crank, just told...
THANK YOU for the ideas on forged cranks!!!! I have been talking to the tractor pullers who run 3 and 4 hemi or wedge blown alcohol motors and...
I have always runs billet name brand cranks, and just bought a blown alcohol fathead hemi with a forged crank. Without getting into name brands...
Has anyone started using the JFR Ford type hemi parts in an alcohol blown combination yet? They are starting to show up for sale now and if you...
