Separate names with a comma.
Rocky's ProMod Shootout will be June 21 & 22, 2013 at Huntsville Dragway Alabama. 6.0 and 7.0 races and the regular weekend race program. Call...
How deep are the wet sump pans on the ADRL cars? I just tried to put a 5" deep sump pan on my car and it is 1" below the frame. I am going to...
Does anyone on ITA make Drive Snout/Coupler Shafts? I need one made for a r980 Whipple to complete it and have a copy to go by. THANKS! Jim at...
39 tooth 13.9mm pulley I have a real good factory marked 13.9mm 39 tooth pulley that I will sell for $60.00 if you can make it work-It measures 6...
Hemi Valves, Springs and Retainers/Locks Ken, I am building a new set of heads for my ProMod and wanted to buy the best parts that I could. After...
I need some input from all of the ProMod Owners/drivers please. I am building a heavy ProMod which will weigh in at 2500#s with driver, ready to...
Heads from Canada The heads came from a friend in Canada that switched to a fathead set-up and these were run on his hemi sportsman car and I was...
I bought a set of alcohol hemi heads that are stamped (Franco) and they were set up for alcohol and wondered if anyone remembered the name or...
THANK YOU John! John, THANK YOU for the help! I was hoping to loose a little weight by running a roots blower, but now, not really much weight...
Please tell us how to set up like a dry sump? Doug, please tell us how to set up a wet sump like a dry sump? I am facing the same problem-THANK...
10.2 BBC aluminum Brodex factory half filled block This was my buddies BBC Brodex Block motor we weighed and it was half filled/or half water...
THANK YOU for the HELP! I can always get the help in need on ITA! THANK YOU for the replies and Merry Christmas to all! Jim from TN
We weighed the same set-up longblock all aluminum billet crank/big chief style heads (intake to pan; dry-no oil) BBC today at 495#s, the Hemi...
THANK YOU from TN-PSI Weight THANK YOU for the offer, we are needing to know to help on planning to build a new ProMod Chassis and figuring...
Can someone tell me how much a PSI Screw Blower weighs ready to run with drive snout, no hat? THANKS for any help! Jim 931-580-8804
10 DP teeth dodge flywheel For those that would like to know, the Chrysler flywheel for 130 teeth are 10 DP and the Chevy flexplates are 12 DP on...
Can some one tell me the DP of the teeth on a 130 tooth Chrysler/Dodge flexplate? THANKS! Jim
Anyone else have info on Hemi and BBC weights???? Can anyone else tell me if they gained or lost weight on a total engine when they switched from...
Can someone tell me how much heavier a complete aluminum hemi will be over a complete aluminum BBC, with or without blower. We just need the...
Kroil from Nashville, TN Has anyone tried Kroil based in Nashville, TN, it is a big supplier of oil products and can be ordered over the...
