Separate names with a comma.
Here ya go http://www.jerrybickel.com/bellhousing-flexplate-and-clutch-components/clutch-cooling-system-jbrc2150.html Brandon Booher NHRA...
The new Leahy Command Module, has all the channels, rpm controls, psi controls, timing controls you could want. I'm not sure how it compares...
Likely very true, it has been several years since we have ran a roots setup. Darren is great to deal with and can answer all your questions, give...
The first "5" was a 5.99 @ 228. We had a BAE5 with PSI 8-71HH, Lencodrive 3 spd. and a Coan Converter. The car/driver was right at 2100 lbs....
It depends on the rocker system, .058 for TD, .100 for new BAE setup, check with your rocker manufacturer to be sure. Brandon Booher NHRA TAD #34
http://trackmeteronline.com/ Brandon Booher NHRA TAD #34
We didn't have a flow meter on the car during those years. I can tell you we went about a tenth and a half quicker with the PSI vs. the SSI. We...
We ran a PSI with ERD/PSI mods to it, made around 40psi in a BAE setup. Before we had the PSI we had an SSI, good blower just didn't make as much...
Triple T makes a nice tool but straightening is more for iconnel exhaust valves. If you have to straighten them vs. buying new then maybe don't...
Sheldon Bissesar (sp?) went 5.68 in T/D trim at PBIR a few weeks ago. I believe he has an M5/BAE combo, Aaron Sipple tunes the car. I know Marty...
If you are at some point during the run adjusting fluid flow to create more torque...your fluid might get warm and cooling it would be a good...
Call and talk to Steve at Total Flow, I don't run their heads but you couldn't ask for a nicer guy to help you with your questions. Their contact...
Lencodrive and Coan, 0 problems. Brandon Booher NHRA TAD #34
Mike Reichers of R&R Connecting Rods makes a very nice piece as well. We've been running their rods for over 10 yrs. with very good results. I...
What fluid are you running and how full is your L.D. after you've filled and went through the gears? We monitor temp on ours, rarely see above...
Coating is used in nitrous and endurance applications, as well as nitro. In a blown alky deal it just isn't necessary. If you have skirt issues...
Big waste of time and money, as cheap as pistons are there's no need to coat them for blown alcohol. Brandon Booher NHRA TAD #34
Though not the cheapest Stable Imaging is what we use and their system can sync with Racepak. We have two small onboard cameras that have billet...
8973=bad bad bad You can use a 6 shooter, EM Timer, and pneumatic/elec solenoid to accomplish this. I don't know if it works or not and I do run...
Nicest cylinder head work stand out there is Tiple T, nothing even compares. I've used the other version posted above, save your money and get...
