Separate names with a comma.
Is this the 114x Crane style cam? 296/300 .4778 int lobe .5100 exh lobe 114 centerline BAE sells a really nice bridge setup to degree a...
Take a set of dial calipers and use the backside, put it inside the small end of the rod, hold pressure on the calipers, and have someone turn the...
We put new valves in at 60-65 runs. As Scott said, keeping an eye on the keeper grooves is very important. You can get a valve concentricity...
What's coil bind on those springs? Are you checking lift on the actual head and not just computing lift (rocker ratio x lobe lift)? You may find...
Brandon is there helping Kosky, his time is from the previous attempt to run the race. I did not go back (kicked rods in Norwalk), Brandon...
We run CP Pistons, very happy with their service. Have used other manufacturers as well, we believe CP to the best we've used. RaceTec also...
2 options: 1 - remove and put a Leahy Command Module on and never have issues again. 2 - get ahold of Mike Canter, he's leaps and bounds...
Which lifter are you currently using? Brandon Booher NHRA TAD #34
I run a Gorr BV for informations sake. Brandon Booher NHRA TAD #34
I don't have a part number but if you go their website and look at the respirators you can find them there. I recommend full-face yes, once you...
That is what I show on my graphs and those numbers are consistent (relative to one-another) throughout the recording process. I use a .900...
McMaster Carr has them, they're around $85/ea. and they're worth every cent. Brandon Booher NHRA TAD #34
You'll lose about 50-70# of pressure measuring it there. Brandon Booher NHRA TAD #34
You should be somewhere between 150 and 200psi. Brandon Booher NHRA TAD #34
You'll have to hold your foot on the brakes. It doesn't seem to matter how new all the guts are, they still creep. You could put a line-loc on...
I epoxied some Moroso engine magnets by the oil drains (in the head), this has caught tips many times and is a cheap/easy fix. Brandon Booher...
Nicest one I've seen is made by Triple T, they offer it in titanium or steel. www.tripletraceproducts.com Brandon Booher NHRA TAD #34
Randy is spot-on correct, this isn't his first rodeo :cool: Brandon Booher NHRA TAD #34
CC Per Turn is a way to check and see when a bypass opens and also to zero your graph (or another way to do so). Remember when looking at CC's...
Agreed on all fronts, sort of.... Jesel is the best lifter there is....hands down, they are expensive as hell though. We ran the same "dog bone"...
