Separate names with a comma.
Pretty neat piece of equipment you have there. I saw that you had the injectors in two different places, 16 in the port and 8 in the port and 8 in...
If I remember correctly, the rears are to point straight down. I haven't talked to Norm in awhile, but he swore that information was in the PSI...
Stock block is a different story. I wouldn't fill the block that you have and I wouldn't run freeze plugs either (air is an insulator)
The front nozzles are supposed to be pointed down and to the back at about 45*. The last I spoke to Norm Drazy he told me this was due to when...
Link doesn't work. Our of curiosity, what type of car/application is this for?
Same weight?
You are probably going to have to re-balance. AJ was supposed to come up with a rod that is close to the Brooks in weight with the deep cycle...
Is the number 55 a constant or is it derived from something? Thanks for the very informative post.
You can send it back to Whipple. The Whipple displaces more displacement per revolution then the PSI C. If you use the search and look around...
do they come complete? what are they using to trigger the air cylinder, a pressure switch or RPM switch
Does anyone know what was done to fix the lean while pedaling problem? Was there a modification to the spool? How do you know if you have the...
X2. Is it truly pneumatic, or is it like the one above where you have to use electric? Anything to watch out for on this type of setup?
I was searching around the web when I came across the following unit produced by spud miller:...
Didn't Tom Conway do an A/fuel Camaro about a year or so ago to be run in the ADRL and there was a pissing match between the NHRA and the ADRL as...
Since we are talking oil, does it matter which hole you dump it in?
What is the compression?
after you put yourself out!
I thought that they used ATF in automatic transmissions because it was more of a hydraulic fluid which helps apply the bands and such in an OEM...
Call out to PSI and talk to Roger or Norm. They should be able to get you pointed in the right direction.
Where are you taking the high speed from? Is it close to the pump? Just wondering if the 'pulses' from the pump at the lower pressures are causing...
