Separate names with a comma.
That's kinda cool, being in our neck of the woods. I love racing in Calgary, I just hope they have some money to make the track smoother.
Mike, when I ran my hellfire piston rings in a 526 inch blown hemi, I first started out with .032 on the top ring and .024 on the second ring. It...
I run .040 on my top rings, .032 on the 2nd ring, in a 4.310 bore. Years ago I tried running .024 to .030 on the top ring, but they butted up...
I agree with Comax, put big sprags in right away. Your ratio's sound extremely high, I would start with a 1.90 or a 2.00 low gear if you can....
I agree Will, I would be very cautious.
I don't run less than .011 clearance. Also, make sure you don't gap your rings too tight, it will have the same result. I run .035 or more on...
Most of the hi-helix blowers have billet rotors, the standard blowers do not, so the hi-helixes tend to be heavier, I think.
Congrats from me too guys, very cool. Ken
I have had to cut these in half to get them off the crank. If you are careful with a saws-all, you should be able to make a slice without hurting...
I don't know the whole history of AHRA, so don't quote me on it. When I started racing AHRA events in 1982, AHRA events were run in Spokane...
For alcohol, it depends on how much boost you make. For a really good roots blower or a screw blower that makes 50 pound boost, 12 to 1 would be...
Up here in the cold north we are often in the low 60's or 50's. If we don't use gas to start it in the morning, it just backfires out of the...
I ran into two separate ignition problems in the last couple of weeks, you might want to check these out. First one was a broken primary wire...
I don't think it matters what kind of head you run. I think the main things to consider are the weight of the valve, the diameter of the valve...
If you go with the PAC springs (that's what we use) make sure you get the latest mods from Manton, drilled rockers & adjusters, so you get lots of...
Sounds great Mark, thanks.
For a hemi with a screw blower, I don't like running anything less than .050 thickness. If you are not running a whole pile of boost, and aren't...
Hey Mark, please post some detailed results for the alky funny cars tonight if you can.
If you haven't done so already, get the system flowed & set up by a good fuel system guy. The damage was likely not the fault of the wrist pin,...
60 wt is a good oil for most conditions, hot or cold. If it is extremely hot, you could add a bit of 70, but I don't like 70 by itself, have not...
