Separate names with a comma.
That's interesting, I hadn't heard this story before either. I do know that I didn't get any support from DMPE when my 30 run old blower blew up...
The K9 rotor is highly susceptible to cracking due to the minimal material thickness between the groove for the teflon and the lightening hole....
The only difference I have seen is that the support bracket changes.
You can actually run it at zero, or a couple thou tight, as the aluminum block grows in length as soon as it gets any heat in it.
That's definitely the one ta 455. Can you give me any more info on the website and phone number/address?
If you're buying a used Kobelco, make sure you get one with K11 rotors, the K8's and K9's are prone to coming apart, based on my own personal...
Stock size is 2.000 inches. Most everyone runs the 2.125 inch journal now.
I agree. I like my leak downs to be 20 or so in the shop, but if we're at the track, I only get really concerned if the leak down is over 50% and...
The leak down sounds fine. Myself, I would gap the top ring at 32.
The most common error I see is that, when re-assembled, the rotor are swapped from side to side. The blower will still usually turn over, and...
I think mostly you can compensate for altitude by taking fuel away, but going from sea level to 4 or 6 thousand feet you can get away with a bit...
I haven't run that exact setup, but with a roots blower and a 44 amp mag in a hemi, I haven't ever gone over 29 degrees. I think you should start...
If the truck on the left had a wheelie bar, he might get up on the tires a bit sooner.
We use #3 lines.
Merry Christmas Will, Bob, and everyone else. Hope you had a good one. Ken
You can get the O-rings from any seal place. The important thing is to stay away from Viton, nitrile, and polyurethane, they do not work with...
That's a good question. It would be nice if we could at least make our gas money back.
Like they say in the movies, I could tell ya, but then I'd have to kill ya.
Back when everyone used to run their idle checks at 3 psi, I had a pretty bad experience that made me switch to the 8 to 9 lbs that Mike is...
If the track is good, I don't know why we couldn't run 1/4 mile. Maybe the fuel cars will just go to 1/8 or 1000 feet.
