Separate names with a comma.
Thank you I am going to a 34.5" tire next from a 36". I am taking less timing out, leaning more on the fuel system (EGTs are averaging 900...
Whipple at 60% over/49#s Mike, it is a Whipple at 60% over making 49#s of boost when leaving and 43#s of boost on the 2-step. I do have 8 to 12...
YES, wide open throttle YES, wide open throttle, NO air solenoid or etc. THANKS! Jim
3000 rpm on the 2-step Mike, the RacePak flowmeter is showing the 4.82 gpm at 3000rpm with a converter on the 2-step-THANKS! Jim
Flowmeter Results on the 2-step I am seeing 4.82gpm on the flowmeter when on the 2-step. My EGTs are going down below 400 degrees average and 3...
What is a good target for EGTs when on the 2-step? I thought I would not need to lean on the 2-step, but really loosing temperature fast when...
Top Fuel Big Chamber Head/Timing We ran the 175cc top fuel style head for 6 years at 32 to 34 degrees with no problems ever with a very fat...
Thank you! Just what I needed: a way to bleed off the pressure to repack! THANKS! Jim
Trying for an easier SAFER way to Bleed Just trying for an easier SAFER way to bleed the air off to repack the chutes besides breaking the bottle...
What is the Safest Air Bleed Valve to run on the parachute system to bleed and use for the repack? THANKS! Jim 931-580-8804 or...
June 21 and 22 will be the Pro-Mod race dates at Huntsville, AL Dragway. See the the Huntsville Dragway Website for details-THANK YOU!
THANKS for the replies-RBS Superchargers has them!! I had several replies to my e-mail address and wanted to send the info on to everyone else...
Who makes the barrel valve inlet fitting with the screen made in it and where do you order them? Does anyone run them, instead of inline fuel...
Just setting the timing the first time for a new motor combination/power grid Mike, I have a new car/motor combination and just setting the...
Power Grid Timing Loss vs the 8973 Trevor, MSD did tell me today the Power Grid would loose some timing (with a crank trigger), like the 8973,...
#16 line sucked shut on the burnout I would have perfect oil pressure, do a burn out and oil pressure would go away, and go to the pits start up...
BAE P&P dry sump pump I am using the pump and oil line kit that BAE says to use and it is the BAE P&P dry sump stage 2 pump. The ProMod car I am...
THANKS to anyone who has the knowledge and help! Many times, all of us ask for help and YES!, I know it is best to ask and pay for the best, but...
Dual Mag Drive for the Hemi If you decide to try the dual mags, I have a dual mag drive I would sell and ship to you for $250.00-THANKS! Jim at...
8973 or Powergrid or MSD Digital 7 What controller are you using for timing on the 44? THANKS! Jim
