Separate names with a comma.
THANK YOU for the replies! It is TIG welded and it is under .080 thick, but wanting to sell the car and just wanted to make sure before I told...
What is the best way to check for a mild steel or chromemoly cage? Is there a pretty good way to test in the field when looking at chassis's?...
980 Whipple Boost The Whipple 980 puts out 601 cu in per revolution-Thanks, Jim
22 nozzles to 24 nozzles TOL, we are running 22 total nozzles now and going to 24 this season. Atomization is also better and ETs picked up quite...
140#s and higher for manual fuel systems I know this is just one opinion, but we are still real low (140#s) on our fuel pressures for now,...
More fuel pressure, smaller nozzles, better atomization? Is the best information here from all of the fuel going in the hat or ports, to still to...
4.375" and .017 dykes top ring For me, it is 4.375" bore and a .017 dykes top ring-THANKS! Jim What is your bore size?
Ring Package Recommendations Steve, let us all know any ring package recommendations that you receive that may help all of us! I am having leak...
Poly PG Trans mount We run a standard Polyurethane red powerglide mount under an ATI SG 4 in a ProMod and never have any problems. ATI wanted us...
Weld 4.75" alumstar centers I have a pair of Weld Alumstar centers for $150.00-THANKS! Jim 931-580-8804 or csmjimbkyle@bellsouth.net
My part picture showed up-WOW! A good seller in the UK just notified me that he had the part I needed in good condition/great price and thet he...
a980 Whipple with built-in hat needed I have found several r980 Whipples now and need an a980 Whipple with the hat built in. ITA has helped me...
What RPM? Are you asking at higher RPM? or lower, and where to you want to make power? THANKS! Jim
Rebuilding/Restoring Whipples I am rebuilding the old Whipples and trying to find parts for them. I have made some new parts, but they are about...
Wanted, any broken r980 or a 980 Whipple (old school style) Charger parts or broken superchargers. I can use parts from any blowers needing a...
HardBlock Filler for Aluminum Heads and Blocks I should have mentioned we used the HeadBlock Brand of filler, which is a type of grout with medal...
Blown BBC Conventual Heads-FILLED I filled a set of Dart 325cc BBC water heads 16 years ago and have run them in a blower motor and never had any...
Whose standard ring sets does everyone use or like for high boost hemi applications? I had asked about gapless rings and no replies, so I guess I...
Again, my motor is down for service and some friends and businesses are pushing or selling the friction coatings for the sides of the pistons and...
Can anyone give me their experience with high boost hemi fatheads motors 9000rpms and up, 50#s and up, running gapless rings or does it work OK?...
