Separate names with a comma.
I made a jig for pinning the main bearings and steel rods for a bbc back in 1968 worked real good. got the pins from Joe Pisano (Venolia)
just a tought, what kind of pressure dose the cam see opening the ex valve, and doesn't the boost help open the intake valve, should the ex valve...
From the heads to the coil ground, Then gap your plugs to .015. no more than 29 * timing ;):D
Looking at the motor from the front with manifold up, crank turns clockwise, you put the bottom bearing with tang to left side, Top bearing with...
Joe Amato, will be there sighing autographs, and have his first race car ( 39 Chevy coupe ) there.
any fool can make a rule, and any other fool will mind it. Any one that cheats in life, don't mean they will cheat in golf, but if they cheat...
Any one going?
If you want more clearance, plus + bearings will give you less clearance,you will have to " POoLISH" the crank
From what I understand The Two lobe blower that Don Hampton makes, at 8/71 size puts out more air than an 12/71 stripped, going out on a limb i...
They most likely got the specs from your cam and reground it, cam blanks are at a premium.
Check on how many gal. per min. it flows then go from there, 90 jet flows 2.0570 gpm, divide by 4=0.5142 gpm comes out to be a 47 jet=05063 gpm...
FYI lower the # hotter the plug, 10 colder than 9, we gap at .015.
Dam, he's got all that money? how many rabbits can he eat?
That has to be another issue with the two different type cars one idling into the lites and the other winding the shit out of there motor. What...
RIP Sig, Gods Speed, Gene Terenzio Sr.
Are you the same Hank Wilko that let me use your 331 hemi short block, and i put my cam and blower and heads on it we put it in Anthonys BB/A and...
Hey Serge, I'll be in Canada ( Vallyfeild? )this week end with the trippel nickel boats,( Zabady ) hope to see you there. Gene Terenzio Sr.
When I was seventeen It was a very good year It was a very good year for small town girls And soft summer nights Wed hide from the lights On...
70 % hat nozzles, 30% port nozzles, http://fuelinjectionenterprises.com/tuneup.htm check this site out and it would be smart to have the system...
If it were up to me I would put fire fighting foam in the barrels. ;)
