Separate names with a comma.
Clearence Remember the aluminum rod expands more than steel, and expands in also, closing the clearance when it gets warm. Be sure your main...
Which manufacture of pistons do you prefer?
stopping lean out I put a check valve, something like 100#, I then ran the line to the top of the hat distribution block. That way it prevented...
BELT tension when i was having belt breakage problems on my BBC, one of the well known blower companies told me i was running my belts too loose,...
Per MSD engineers When I was talking to the design Engineers at MSD, their statement was that if your fuel is right on a 20 or 44 will not...
leak check take the air cleaner off if you have one. start the engine and put something "solid" over the manifold, piece of carpet or something...
ignore the leak down when the motor is cold. heat the motor up then check it, aluminum expands a lot, you will see them leak cold then seal up...
i am sure it is here, but i do not see anyplace to help me with my uploads. I compressed a jpg to 27.6 kb, when i try to upload it i get a...
drive yup ran them on 3 Donovan drives before going to KB, still run it with one Donovan. there is a spacer that should have come with the drive...
Upright Injectors for sale One of the pullers is parting out his tractor and he has 4 upright injectors for sale, Gerrardo, in addition to KB...
BBC head gasket be sure you use the valley bolts. Clark Gaskets, be prepared when you call them, they will make just about anything you want,...
How long do you run your pistons? If you have to change pistons, do you change wrist pins? How many runs do you put on your wrist pins...
heat heat is cumulative, that is if you do not change anything and make the same run again, then the plug is probably going to show more heat.
piston to head on the Veney head engines they are run so the piston just touches the head at high rpm. when you take them a part you can actually...
why why do you want to run an upright, unless you want the air filter?
Rods I believe the 65's are the Chevy profile, lighter rods and are torqued at the lower torque. I am thinking they do not come with the black...
Belts & Wires I have a multi engine modified pulling tractor, a couple years ago I changed blower & ignition to some used Pro Mag 20's. I...
Per MSD Per MSD engineer The 20's were originally made for the Alcohol guys. Some then the guys started running 2 of them. From there they...
auto meter I run 4 motors on my pulling tractor all had super mag IV, data logger worked perfect! Went to MSD pro mag 20's still works...
Manifold spacers I have 4 KB olds motors on a modified pulling tractor and have always run the manifold spacers with out a problem. If you do...
