Separate names with a comma.
...you might also try checking for spark. We had no spark w/ 12 volts running off the mag. 24volts showed plenty of spark.
We run the same setup. Make sure the start retard is turned off. We couldn't get our's to start either. 24 volts turned it fast enough to...
When calling Bruno for advice, ask for Bruno Jr. He's a little more friendly for giving advice. Josh
Just a stupid thought but i wonder if the exhaust could be pushing the car forward until the sprag in the lenco seats? Cause if the car does...
If you're reading 78 on the second gauge, that would be 22% leak into the motor. You need to see 22 on the second gauge to get 78 leak to the...
Brian, are all your egts reading the same before you fire the motor up? Randy @ RPM told me that if one is way out of wack, it will cause that...
You're talking about two different numbers. Launch rpm is whatever you set it at. Converter flash is relative to the converter, then allllll the...
Good to know Paul.
That's true. BV leakage is just a reference. Everyone should be clear however on what the numbers refer to so you're not far off on start up.
I think some are referring to the number they are reading on the second gauge, verses what the number actually means. ie>reading 30 on the second...
The % is how much is leaking into the motor/cylinders. 70% leak is 70% of the fuel going into the barrel valve is actually going into the motor,...
You might see if they even out if you bring the motor up until the port nozzles open up.
We also leaked the barrel valve w/ the hat nozzles hooked up. Even though you're leaking the bv itself, I would think the lack of back pressure...
Hey Brian, we run the same setup as you, 526kb, 14hh 27% over, brad fuel heads, promag 44. Before the winter when we fired it up we had 30...
x2, In the transmission world, straight cut gears are usually stronger, but make a lot more noise. It just adds to the effect! :p Josh
I don't think you can adjust the band. It's on 2 boss's in the case and the apply side is the servo that apply's until the pin stops. So if you...
Hey Danny. Curious who set your chassis up, or who you might recommend. I'm in kansas. We're running outlaw 10.5 w/ a blown hemi. About time...
We're running a KB526 stage 10. What do most do w/ sealing up the o-ring on the sides of the rear main cap. They have those 3" long o-rings on...
Another for the Hemi! We're ford guys, always have been. But there's a point where you have to choose whether you want to be unique, or...
On that note...where can you find a chart that shows what the specific gravity should be at certain temps? Or do you all just make sure it's...
