Separate names with a comma.
I agree w/ Mike....going from standard 60 degree rotors to hi-helix 120 degree rotors is a huge increase. According to Littlefield, a "retro"...
This is not a retro, but a Hi-Helix (120 degree rotors) [IMG] A retro blower would have an even further cutout on the "pie" opening towards...
Is there really that much difference between Sonoco and VP's methanol? $100 a barrel difference? What's your guys' experience? Josh
Okay thanks Brian, that's what we're wanting to do....leave the step 1 retard active, as well as use the gear retard curves. Josh
Am I reading this wrong? This is straight off MSD's site on the 7531's instructions: Gear Select The Three Step Retard wires, Pink (1),...
On our Digital 7 7531 we have power to the step 1 retard wire all the time for ease of setting the timing. If we use the gear retard...
Are they Gt belts?
Isn't there someone that sells belts that have like 1 or 2 passes on them from the fuel guys? Looking for some backup 14mm 1568x75's. Josh
Thanks for the replies guys. QPM, I think those are it! I could find flange nuts all day, but finding a 1/4" nut w/ the big head (1/2") was the...
Anyone know where to find 1/4-20 (fine thread) nuts that take a 1/2" socket? We have a few and they have the washer built on the nut. Work great...
Ronny that's a good point but they were in correctly. The plate doesn't show wear like you get when you "load" a pump or stack the converter on...
I think there was about 1/4" play when the converter was bolted up. Marty @ Neal Chance Converter's had us measure everything before he made our...
Plate is bad too, scarred more than anything. Maybe slightly distorted. No aluminum on the plate though, I don't think. I beleive this was due...
Pump broke in our Bruno unit, didn't know it, did a burnout, vented fluid out. Here's what the case looks like. We think it's electrolysis....
I think we did remove that poppet...we just have a 90 AN fitting now. Pulled the Bruno out lastnight. Pump was blown up. Hence why it started...
Anyone had any trouble w/ their bruno drive venting? It was about 1/2 quart overfull. During the burnout tires stopped spinning and the engine...
Well it fixed it. I have the step 1 retard on at all times w/ 5* pulled so we can adjust timing the computer. We actually started it and it...
This is an older post but I told you all i'd follow up on the fix. We're starting the car tonight and I'll let you know if switching to tach...
In quick simple terms I believe corrected altitude you're hearing is the same as density altitude. Density altitude is described as Pressure...
MSD makes it. P/N 7990. Takes about 30 seconds to hook up. It's just a toggle switch so you can start the car on the mag, then while it's...
