Separate names with a comma.
JP>thanks, it was a personal best, 4.75 @ 150. We turned the blower up from 27% to 35%. I think it helped. Made only 32lbs, but didn't drop off...
We're running .015" plug gap. We run the Promag 44 w/ our Digital 7. Never heard of there being a hp limit w/ the digital 7. From what i've...
Mike you in the market? :cool:
Roger that.
What do you guys shoot for as far as EGT spread at the end of a run? Our EGT's are within 50* of each other, but have 2 egt's that are about 50*...
I was told by Stroud that the gloves were on backorder and have been for months...when exactly did you get your gloves???
How would you know your vent is too small? I would think w/ a mechancal fuel pump, it's going to take the fuel it wants anyways?
We're running a 33" tall tire. I have a guy that runs our class that thinks my fuel vent is too small. I don't think it is due to all the...
Rodney, the first solenoid (towards the back) is a normally closed solenoid which keeps the co2 blocked off. The second solenoid (front one) is a...
2900lbs and nose heavy. In fact, we've yet to get on the wheelie bar hard. This was only a 5.42 pass due to leaving at only 3500. Figured out...
Mike B-We are running soft at the hit....9* total timing ramping to 25* over 2 seconds....ran a 4.95 w/ 1.15 60' like that. Next night ran 4.94...
We do have a data logger. Spark plugs look new, maybe a little cad burned off the ground strap. I made a program that figures DA and density of...
KB526, blown alky, Promag 44, 1471HH 23% over, Bruno/Lenco 3 sp. We run Outlaw 10.5, 1/8th mile. We made five runs last weekend, and we kept...
We had similar problems...kb stage 10, titan oil pump, straight 50w, on startup had about 120-130, then would go down to about 40-60 after a...
Isn't the rev limit chips just a certain resistance? I should be able to ohm the yellow wires to see if it's setting right.
Mike, this is hooked up to a Promag 44, KB526 blown alky deal. The yellow wires are pluged into the promag 44 points box. I haven't checked...
Is there anything that would cause the rev limiter not to work on a MSD Digital 7 7531 box? The max rev and launch rev limiter's aren't working....
Anyone have a close up pic of where they're pulling on the blower? Blower guard would seem a little risky.
Good to know...thanks guys joshlong@chancetrans.com
We had loops on the bottom of our door car for towing and strapping down in the trailer. Our car is too low, or the loops were too low, and...
