Separate names with a comma.
Know we've kind of gotten off-topic but here is the info if anyones interested. There wasn't a part number on the Bimba cylinder but it measured...
A buddy of mine made one for a bracket car several years back using a large Bimba cylinder and a MAC valve, I've got the pieces in my shop...
You might be able to adapt the Lencodrive dragster shifter that Snyder makes for RED's, it has a lever on the reverser that comes in from the...
Yikes....:eek: I bet it is with that 1st gear. The 36" would probably work with your buddy's 1.73 2-speed with the 4.29's, guess it depends on...
The way I understand it now, if you've got a blown gas or alky anything in front of you, you have to have the 20# system.
My vote would be the 2-speed, ideally with 1.56 1st, although the 1.73 can work with a 4.10 or better yet 3.89 rear gear. Blown 375 made a good...
Hey Mopar, Try AlanJohnson.com he's got several sizes listed under cylinder head components/hardware. 05Z-090 3/8" Head Bolt Washer Insert...
You're only taking out another .0625" of material total, .03125" on each side of the hole. Shouldn't be a problem on either cast or billet head.
I've given that idea a lot of thought, in all liklihood, heat from the fire is going to be coming from the outside of the tin and it does seem...
I have the same problem, was looking at Dennis Taylors website at his carbonex cover, was actually calling him about a 20# fire system and...
1/4" 4130 plates are mandatory in T/F and F/C, optional in TA/D and TA/FC.
I didn't realize what it was called but I think that's what Scott Gaulter did on his Lencodrive that I referred to a couple of posts up.
I'd be willing to bet either one of those guys could make a 100" car work, but unfortunately, I "ain't that bright" and am working under a pretty...
I thought about doing just that and using the short split (taller 1st ratio) tranny for marginal tracks and the wide split for good tracks....
Because its Sunday night and they're not open.............. :D Main reason for a wanting a 2-speed is consistency, I'm running a 7.00 index class...
I thought they were all two speed cases, thats what the site says, they just have to have some kind of mid-plate to join them, along with the...
Can anyone tell me what is involved in splitting a CS-2 3-speed to make two 2-speeds out of it? I'm looking at a Bruno for my altered and think...
I think Eric said it best "If you know what you're doing, you can make a 4-link work"...and the consensus seems to be a 140-150" car is the way to...
And after all, isn't that what we do this "she-it" for............... :rolleyes: My understanding on Hans, R-3, etc. is anything over 200mph...
Yeppers, purple would be my second choice, Darren......... :D You going to be at Norwalk next week? We're testing at BG this weekend and...
