Separate names with a comma.
Correct, there was no way we could have the thumb screw arrangement on a dragboat, never could find anyone crazy enough to ride back there.... :D...
I've been using my old dragboat starter with the RCD cage for three years with no problem. Just make sure you've got the dogs/cage spaced for...
Dennis/Justin, Was going to call and thank you, but thought I would post it on here instead. Thank you for the fantastic service getting my...
Russell, Sorry I keep missing your calls, we're not going to be able to make this one, trying to find some gremlins that turned up last weekend...
Amen, Dave....Thank you.
I've run as much as 32 degrees with no real improvement (541 Veney fuel head) but I'm still using a SM3 mag, so probably need a few more degrees...
Well you couldn't get much better info than from Chase Knight......he is/was the man at Crane for several decades.
296 is duration at .050" lift. 500 is .500" lift at the lobe. Multiply by rocker ratio to get max valve lift. 16x is 116 degree centerline....
I've been out on Russells Hoover on a few occasions just to have him blow by me at half-track like I was tied to a tree...downright embarrassing,...
Flaming River makes a master switch for mags with the extra posts for the mag ground, a little pricey compared to a straight master switch but is...
Along those lines, can a 1.7 rocker with 3/8ths adjusters be re-drillled for 7/16ths or are they two different rockers to start with?
The earlier Veney's are 170cc's like most of the other makes of fuel billets, although if your looking to get 10-1 comp with a 4.5" crank, you'll...
You shouldn't have any trouble at all with an 8-71 at 25% over, and the 572-13 head ought to work really well for what you're doing. Your boost...
From what I remember Dennis Taylor saying, there isn't presently an SFI spec, but there has to be some proof that the material is fireproof, or...
For some reason I can't post attachments, used to think it was just a minimum post thing. Darren, I used to have your e-mail, can't find it now,...
Greg, $300 for a 2-piece seat, I don't know if a 1-piece is any different. I think the Nomex snap-in covers are $375 and Carbonex is $415...
Hey guys, Just got my seat back from Dennis Taylor this morning, as I mentioned earlier, he has a 3rd process besides the nomex or carbonex...
Greg, 75 is the width of the belt in millimeters, 1568 is the length in mm's.
Check and make sure the transbrake itself hasn't come loose inside the pan, it happened to me with only 12 passes on a brand new tranny. That was...
Why take a chance...if nothing else it will keep your oil from getting whipped into a foam...........
