Separate names with a comma.
Throw my name into the hat of happy campers.......dayum reverser wouldn't go into reverse after first round burnout at KCIR this past Sunday, went...
Larry, I was so happy to hear you had licked the bearing problems when I was talking to you, I didn't even realize you had won class...
You mean the one you said was one season old, yet had a 4 year old tag on it?? Yep, after a thorough cleaning and rebuild with two new solenoids,...
How are you adjusting the second solenoid, the one for the pushrod/teflon cone? Bruno told me to back the lock nut off, with the air off, apply...
Mike, Air pressure on the brake piston is minimum #200, fluid pressure at the guage #150 at idle, adjust up for harder hit but no less than #150....
Larry, Do you see any evidence of the input yoke bottoming out on the output shaft of your tranny? How thick is your motor plate and do you...
Does anybody remember if Antron wore an Impact suit? He was being interviewed at one of the "swing races" and was joking about having to borrow a...
You won't see any of them wearing a 2007 or 2008 suit.......be glad to sell you my -20 if you're that high on them............... :mad:
Don't know about Plueger but I'll be there with a Plueger chassis, does that count..... :D I suspect Romine will be there, Indy Good-Guys had a...
VP M-1 is the only legal VP Methanol for the Top Alky classes. Here's the link from VP site. http://www.vpracingfuels.com/fuels_spec.asp
Sorry for the confusion, Doug, I figured you were talking about a Mopar to glide or other style drive, most of which use a Chevy style flex plate,...
Hey Mope, Here is a couple more pics, in case you havn't seen them,3rd and 4th pic down....
Hey Doug, A mopar flex-plate is 130 teeth if you can use the starter in the stock position.
Seems like Isky has been on the cutting edge of mediocrity for several years now......sounds like their customer service has finally caught up...
Here you go Mope.....maybe we'll see you at Cedar Falls next month. BTW, I'm guessing you got your idle problems worked out........
Mopar, It may not prove to be a problem, since you're in the 15psi boost range, but if the .990 pins are thin-wall, lightweight pins, I don't...
Are you planning on a 2- or 3-speed? Snyder only advertises a 1.56 or 1.73 first gear ratio on the 2-speeds, not sure why. I ran a 1.56 2-speed,...
Mopar, Do you have throttle stops on both ends of each shaft, if not, blower vacuum could be twisting the shaft on the end without the stops...
Hey Craig, Is this going in a blown jet boat or is that just your avatar. If so, I would get the tallest block and the longest rod you can get...
If you say so, I just don't remember ever seeing one on a boat. How does the screw back off when the engine fires?
