Separate names with a comma.
ok,so there IS something missing(a shim i guess):p thanks again to you all!:) cyril
hi all! in a mopar big block with a donovan gear drive(old cover but brand new gears),is it common to add an extra bronze shim to limit camshaft...
hopefully,everything is ok on this side of crank!:D after all the times my engines builder had to tear the short block apart because of poor...
called BME:0.058 side clearance is fine. did not say anything about max clearance,but as long as my engine is happy with those numbers,so am i!...
thank you all for infos! the "problem" was,we thought that was too much!:p i ll call BME and ask them what the max clearance should be. thanks...
hi all! i m building a blown and alcohol injected mopar wedge engine,using a used KB crank and BME hemi aluminum rods.i end up with 0.058 in side...
hi all! living in france and about to race on methanol,i understand looking at industrial methanol as an option for my drag car:VP M1 is about...
thanks a lot for your advice!:D
the only electronics i ll need an onboard 12V battery for are an oil pressure warning light and a shift light with the modules to plug it to a...
forgot to mention: i m in france,with 220v being the electrical standard,in case that would be important for the charger. but i found the...
thanks a lot for your help! i ll buy 3 genesis 13 ep then.
hi all! i just purchased a used RCD blower mount starter that works on 36 volts and would like the "right" batteries for it (what amps?) thanks...
congrats to spud! supermags work great!!
hi! i m just about to do the same:cast iron BB mopar full of moroso filler ,and i m about to fill the aluminum heads as well.i haven t done it...
hi! i m currently building a blown alky big block wedge mopar,based on a stock cast iron block full of block filler:i m using a 3/4 inch thick...
which part of the engine should i monitor for temp first? should i monitor oil temp as well?
hi all! i m finishing my blown alcohol mopar wedge engine and would like to know,apart from the obvious oil pressure and blower boost,am i...
hi all i know this thread has been discussed a few times,but i have a rather specific question about the subject: i m about to buy a complete...
hi everybody! just a question regarding filled iron block/aluminum water heads:is it ok to fill the heads also? i m building a blown alcohol...
thanks a lot! the injector looks like it was never coated,as it is completely grey. i just came across an article in an old hot rod magazine...
