Separate names with a comma.
I have a switch in the cockpit that I flip, seems easier/simpler. Brandon Booher NHRA TAD #34
1. No 2. The "C" displaces I believe 11 or 12 more liters of air per revo. than the "D" 3. I believe they are identical on the outside...
I'm going, I just haven't registered yet. We have a silver card so don't have a real rush to give them my "insurance fees"....we'll be there...
What trans is this for? I'm building a setup for a Lencodrive to cool the fluid between rounds. I don't have a price yet, but this is going to...
I have the Simpson and it's nice, I hardly use it but it does work. Brandon Booher NHRA TAD #34
The lobe diameter is listed on the cam card, since it's a 296/500 - 296 is the duration and .500 is the lobe diameter..but you need to make sure...
Where are you getting the lift numbers from? On a cam card they're usually figured with a std. ratio rocker system and aren't accurate for your...
I'd want to have the seals, clutches, gearsets, servos, everything checked...you could easily get stuck for another couple g's if stuff isn't up...
You can ask 10 people and get 10 different answers, truth be told if you treat the rods like bars of gold and cycle them at the appropriate time;...
You have two options here and here they are. You can do a gearset eliminator kit or you can buy a new front case that's .25" longer. The...
What I think needs to be done is the racers who aren't currently racing should be contacted and asked; "what will it take to get you back out...
This is why the refining specialists make the big bucks. Brandon Booher NHRA TAD #34
I agree on all points with Marty, we must find a way to get more cars to the track. We ran IHRA Pro Top Outlaws years before we ran TA, same sort...
I didn't mean the actual tubes, the receivers for the tubes. On some of the other covers; the receiver is threaded down through the top of the...
Worth every cent and it does improve the appearance of the plumbing on top of it. We also run Gorr's BV and really like it as well. The nice...
Yes correct, you can gap them tighter if you'd like but in our app. for instance - Akerly & Childs calls for .007 x bore - as Mike stated; which...
We run those in our BAE motor and gap them at .036 on top and .045 on second. The oil rings just make sure you have at least .015 and you'll be...
Williams makes a very nice set of covers, the plug tubes are welded in which is a big plus over some other brands. I think overall the best cover...
You'll need to call a few times, sometimes emailing is the best. Dave deals with EVERY fuel and alky team out there, there's a reason everyone...
