Separate names with a comma.
In a blown dragster deal 3.750 x 4.4675 = 471". Brandon Booher NHRA TAD #34
.041 is as thin as I'd recommend going, after that you need to use them and toss them every weekend. Husey makes a very nice gasket and the...
The rods is 100% too lights, my suggestion is put something in there (like Mr. Doucet said) over 800g, I think 850-870g is much better. What is...
If you're not leaving with the blades at WOT I wouldn't dump any fuel. The fuel flow @ 8000 seems fine, that's roughly 15.8x at 9000. I'd say...
Rods There's only one way to find out how many runs you can get out of a set of rods....and it's very expensive. I wouldn't run more than 30...
The list of those responsible is far longer than just "Brandon." My dad and brother have been doing this with me since I was 16 (blown alky),...
For as cheap as they are I don't believe you'd see any value. If you own the cryo equipment then sure...-300 below stuff to...
The carbon belt (blue) is technically not as strong, but we have very good luck with it. Both of the belts have 11mm cords, it seems if you're...
We use a variable dome Sealed Power Hypereutectic Piston. The unique aspect of this piston is that the domes are able to be interchanged, you...
Mike Kosky is a Race-Tec Customer. Brandon Booher NHRA TAD #34
Mike Kosky for his win at Reading, and Frank Manzo for his win and the national championship (again). Also to the two runner ups in the...
We run them through the back of the steering wheel and through the steering shaft. They come out (on a dragster) in front of the footbox then...
Do you use the Automan Bolt/Washer? We had the same problem and after switching to that, problem = gone. You'll need a torque multiplier because...
As long as it's vented properly (the tank) you shouldn't have any issues. Dry ice doesn't "melt" it instead turns into gas (Co2)....if your rules...
There is at least one...maybe two different companies that were given the go-ahead on a build. I'm not sure if I can say who...if I can I'll edit...
They aren't but they should be because nobody makes a finer piston that Ed/CP. Brandon Booher NHRA TAD #34 CP Piston Customer!
I've run one since their inception, what's your friends issue? Brandon Booher NHRA TAD #34
The more psi. you run in the tire the more traction you'll have, the less psi the easier it is for the tire to spin ='ing less traction. Those...
The Lencodrive is the best piece out there hands down. We've run it for over 10 years and had zero problems. If you're running a high hp deal,...
Found this on DRC; a nice piece on a great group of people. http://dragracecentral.com//DRCStory.asp?ID=235660#indextop Brandon Booher NHRA...
