Separate names with a comma.
Call Spike @ Gorr Fuel Systems, I know he's not "east coast" but he's the best their is in my mind on a Waterman. Brandon Booher NHRA TAD #34
As far as in the 5's there was one other that I know of; only because we both ran in the 5's at the same time against each other. I question the...
We ran in the 5's with an 8-71, this is in legal top dragster trim. We used an 8-71 PSI HH, had an SSI 8-71 prior to that and the PSI was better...
This whole concept started in plain sight....nobody was smart enough to figure it out....
In Gainesville 2010 I was racing Reichert in E2, I felt the motor sort of nose over so I grabbed the chute lever. About a puff-teenth later the...
We use Spike Gorr's system, great customer service and a great product. We've had the same setup for many years w/ zero issues. I just sent it...
Short answer....a lot. An ADRL car weighing 2300-2400 lbs has approx 3000hp and runs 3.60 on avg. Assuming you have the absolute best of...
No real experience with a suspended car of this nature; some PM stuff but not a digger. If I say that wheelspeed is wheelspeed and the shock only...
Leahy makes what you need, the larger battery weighs 3lbs I believe. We run all our electronics and the Lencodrive transbrake with no issues....
Too broad a topic to answer effectively; what are ratios, weight, rear gear? We ran a SBC w/ a 10-71HH (3.90's 1/8th mi) and never pulled any....
Make sure (if there is one) that the screw at the center isn't out too far. Also, put a drop of silicone on that screw to limit vibration and...
Flowed System Jet area doesn't really tie to horsepower, it'd be more based on the blower and cfm of the cylinder heads. The best money you'll...
Yes Mike just saying they'll be close, I have seen people have two "35's" in their leanout(s) and one was actually a "135", the "1" was just not...
A needle dial will get you close enough. Generally jets that have been flowed have the jet number and a "F" somewhere on the same side. Unless...
True...but I built an equation that puts engine RPM into the mix. Brandon Booher NHRA TAD #34
Albeit less technical I have a channel on Racepak I call "A/F Ratio" which is boost/fuel flow. It's not a double throw down sensor but it's a...
Do you feel that since the tire isn't slipping on the rim and it's "tugging" the motor that one should maybe fatten it .05 or .10 in the main?...
The Altacom that works with Racepak is nice when used with the pager, bit pricey but nice. I think Gorr has the best station and I'd say it's the...
What's your quickest pass so far? We ran 3.90's with a blown SBC, Santos deal -12 heads etc, I think your goal may be a bit far fetched. We had...
Ringers made a really nice glove but don't anymore, Sparrco is junk, and the Simpson is like an oven mitt you were talking about. I'd recommend...
