Separate names with a comma.
Heat Treating a chassis just does not seem like a good idea. I know from just clutch lever material experimentation, heat treating overkill makes...
Welders at the track. I know two guys who bring welders everywhere they go. One has a standard size the other have that portable Miller deal.....
I need to ask Arnie if we can get bullseye's printed on the SFI stickers from here on out. :D
drilling Yes, drilling the floaters helps from what I have seen first hand. As long as you remember to keep the holes opposed 180 degrees, there...
looks like what the Roundy Round guys use for their pit road speed windows.
They certainly had the track's number when it was all said and done. Including that 5.56 in qualifying on Saturday night when it was colder than a...
I'd go with a 47 or better as long as he was having a Superman weekend. I think everyone else running so close to him would give him reason enough...
About 20 or 30 mins late I think. It was worth the wait though, man those TAFC's were fast. I was there and it really didn't sink in how fast...
It could be a number of things. Is your throttle response good or does it labor to hit a high rev while "unloaded"? That size roots blower will...
Is this a recently occuring problem or has it been like this?
Funny cars go through the chassis. More room. :D
Alignment tool is an input shaft without a gear head or splining on the transmission side like the normal input shaft. You could use the input...
I thought it had more to do with the clutch trying to keep up in high gear. I've been fortunate enough to see the data on a 26 pass and the only...
Tyson, Mandatory: THICK set of gloves Bigass Torque wrench, usually the same you torque caps and flywheel Anti Seize for cover nuts (and...
Why not have the best of both worlds and recommend an 11500 chip in the box? :D
That would work for you.
If you push in the clutch, doesn't the motor drop to idle? assuming you have your foot out of it? If it doesn't, then your floaters have grown...
You can set it on a flat stone and it will read the same thing too, but you might need a CMM to check it to keep track of the points.
Yeah, they also spin their clutch only 9,500 RPM's max and their run lasts 4 seconds. They also put a fresh clutch in every pass as well as...
Okay, you have a heavier car so that generally translates to needing a bigger clutch, or you can run a smaller clutch and run higher gears. Tuning...
