Separate names with a comma.
I looked at an old run i had 526ci brad 5 20% nitro staging the car @ 5500 0 boost.... .08 20 lbs and .2 30 lbs also pulled 0 timing out.960 60 ft...
thanks pm sent
http://www.fans-plus.com/products/qmark_A300.html get one like this. Its about 150 and if you are good a fabing things you can build duct to fit...
Switching to 481x seen most are running 16-18 QT oil to keep from sucking pan dry.has anyone run a multi stage maybe 2-3 in pan one in the intake...
I ran blown sbc for years 14-71 45 lbs boost.When i put new gaskets on i would torque them loosen them up and re torque. With the 18 and 14 dergee...
can't do floaters that way i used a surface grinder with coolant at the shop for them
Have a 12in dia aluminum face plate has a post that locates the id of the splines.Then bolt a cap that rests on the hub only tighten finger tight...
I have been cutting my disks for years on a lathe dry with a diamond insert.I use a shop vac to keep the dust down still messy .I picked up a nice...
I took my one ton to the local diesel shop for some service work.Was talking to the owner they do a lot of high performance engine work and have...
I like the 2 wheel bars in a door car i think it gives you more control. btw they make small thread insets to fix the striped out ones on your rotors
You might talk to Jamond the 4.11 run only had 34lbs and the egt's were in the 850 range very soft safe and happy
I always ran my BV a little lean at idle wanted to build heat faster and did not want to milk the oil with the old kendel oil we could go 3 to 4...
700-800 idle 1100-1200 at the 1/4 387ci pro action 14 heads 14-71 15 over 40 lbs boost 4 speed Lenco 2900 lbs 7.50's 189 mph
Shift and launch rpm's make a big difference as well.a bbc @8500 is way different than a hemi @10500
One other trick on the floaters is rough grind them close then put them in a cooler with ice water cool them down. Then take very light cuts if...
i also ran a studded 010 block it was a 355 stock steel 3.48 crank 6-71 blower kept the boost under 22lbs ran 8 flat in a 2900 lb door car also...
I ran a blown 10-71 362 CI SBC 25lbs of boost a long time ago had a -1 hilborn pump think it was around 7 GPM had hat nozzles only. The largest...
hey alton bring it by the shop maybe able to fix it jim 417 880 1945
Are the 9.5 gears any better than the 9''..... looks to be only a 1/4'' and 200.00 deference.
What is the right scale, KG load ,and penetrator type .500 ball ???
