Separate names with a comma.
Brian; CFM or CID? ;)
Starting line was slippery not because of lack of VHT but because of cold tires. Did I read that ET right? 7.9x in the 8th mile?
Of all the uses of helical cut gears in the auto industry, I never did understand why gear drives use straight cut. It would seem that a...
We're running a beefed up T-400 at 3450 Lbs. Our last 505 was just slightly more power than your current blown gas motor. I think we have...
You're going to need to up your ignition for alky. That MSD Digital 7 isn't going to make the grade.
Look closely at the photo. I can see what appears to be a tab welded on the rack, perpendicular to the rack. It's between the boot clamp and...
Didn't know the answer, so I called Jim @ Enderle to help you out. Jim said don't use anything bigger than a 110 pump (~13 GPM) on the square...
Eli; I'm not sure if I pissed in your cereal in this discussion, but it wasn't my intention. My intention is to share information with other...
You could 'what if' all day long. But why add more possible points of trouble?
Propane actually works better than freon in an A/C system. The downside is that if you spring a leak near the header, you wind up with a rolling...
True, but then people might see the pump and question what you're running for coolant. For that matter, you could simply run a dual fuel pump...
I'll call Meziere tomorrow and see if the seals can handle it.
Gene; While using alky as a coolant in the radiator sounds like a good idea, isnt that a bit dangerous? Won't it eat up the seals in the...
Well, if the majority are using a $15.00 lead acid, no point in spending more to save a few pounds.
So yesterday, during my conversation with JR @ RBS, the topic of batteries came up, which happens to be what I do for a living. JR specifically...
Guys, I thank you for the replies. I called JR earlier tonight, and told him about the thread and told him I wasn't trying to disparage him or...
These images may help further explain my concerns: [IMG] [IMG] [IMG]
Craig; I'm not trying to disparage JR by any means. I'm trying to ascertain whether or not this is even an issue worth bringing up with him....
Ok; So I just got brave enough to pull the bearing plates off, leaving the rotors attached to the front plate. I did this so I could send...
Mike; Isn't methanol cracked off in the towers too? Somewhere up top?
