Separate names with a comma.
http://www.moserengineering.com/Pages/Axles/customalloy.html http://www.markwilliams.com/axles.aspx 35 spline up to 8.00 ET. 40 spline 7.99 and...
I don't think he's saying either. The way I read it is this. Grounding the coil until the RPM's come down is a bad thing. Using a PSI...
Mike; This is here say, but I'll repeat it. I have heard that quite a few good people went to www.CPPistons.com from JE. You might want...
Now, I like that idea. And yeah, once you fill them, it's pretty limited on application. There's been a set of filled heads on Racing Junk now...
Brian; Keep in mind, you're not running a SSI F-Rotor at 35% over on a 12.5:1 motor either.
Be careful, the Pro 1 heads are a thinner casting than the 320/360 race series.
You could spend the big cash and go to Jegs, or you could go here... http://www.powerwerx.com/product.asp?ProdID=3540&CtgID=3578 Those...
http://www.insidetopalcohol.com/showthread.php?t=15785 That may help or may confuse you further.
I'll show this thread to Shannon Beal (former ta/fc driver) tomorrow. He's out in that vicinity and I'm sure he'd want to participate.
Nancy; Thanks, but I got a PM from Jeff Wilson about Jerry Hunt's contact info. Jeff said he's delivering Brad Penn for Jerry to all Div 3...
I'd be down for some NGK #R5671A-9... Say 100 plugs depending on cost.
Sounds like I'll be moving to Lucas then. Bought some Valvoline ZR1 and the Lucas High Zinc Break In Additive to fire it up (convenience)....
Jerry Hunt in the STL metro? Have contact info?
Thanks... Was kinda leaning toward Valvoline myself. Seems to have a fair amount of Zinc in it. Now, which one? VR1 -...
Ok; There's no dealers in the St. Louis metro of Brad Penn that I can find. Maybe I haven't looked hard enough, I dunno. At any rate,...
I purchased the MGP rods over the winter... Hope they work out well. Took about 2 weeks to get them made.
Ok, so lets say that you have 700 egts, and it is a false reading. If the head temp is the same from one run to the next, how would you know...
Danny; Might be a silly question, but what good is head temp if you're reading EGT? Is there a correlation between the two?
You sure about that Mike? Looks like it would work on any bolt hole. More importantly, did you call and ask?
http://www.pwrd.co.uk/racewear/bob1.html Good looking shirt.
