Separate names with a comma.
Hi CMD, How big is that SBC? What heads are you using? How are you keeping the heads sealed between the center cylinders? and last but least,...
Tuneups All the above plus more fuel top versus bottom, fuel through back of blower, percentages???? Timing strategies, clutch...
Books Does anyone offer/sell a book that goes into different types of tuneups? I know I would be interested.
boost WHY? The cylinder doesn't know the source of the boost, or am I missing something.....?
steel rods Whether steel rods live or die may be due to cylinder pressure which would take into account compression ratio, cam timing, type of...
Steel Rods I guess I will stir the pot here, how come most/alot of the turbo guys run steel rods (in exc. Ecotech racers) the motors dyno between...
Steel Rods I have been running steel rods also. Bearings did not beat out. I think as long as you stay "safe" on the tuneup and do not detonate...
Valves I am running titanium now, just wanted to make sure I was not making a mistake. I turn about 8700 in the lights, next set of tires will...
How well do Titanium exhaust hold up as compared to stainless exhaust valves? Blown alchy SBC 25 lbs boost 8% over 8-71. I am wondering if I...
Fuel Return Mike, Does it make a differance how much fuel you return back? I run the returns back to a fuel log I made about six inches...
I agree with not needing water in the block and when the block is filled it stablizes (sic) both the cylinder walls and the mains.....but when you...
I use an evaporater core from an automotive a/c system with a/n fittings welded to it, I made a surge tank out of an automotive accumulator with a...
The problem is not burning the valves, it is having the head get hot between the exhaust and raise up (a few thousands causes a leak between the...
I have a SBC and run water through the heads with the block filled, because of the center exhaust valves, would suggest you do the same. Drill...
Cooling SBC Yeah that would be great if you could give me Rick Santo's number, I tried the email address in ND and it didn't work. Thanks.
Frank Intini check your personal.
Sbc I am using bow-tie blocks, billet caps in the center and straps across the front and rear caps. The "new" block has billet on all five, it...
block cracks The block I was using was old (1991) and was not siamesed. Block was filled to the water pump holes, the cracks occured from the...
Hope everyone had a Merry Christmas and a Happy New Year. I have a SBC with an 8-71 on Alchy I have been running a cooling system but at the end...
pump flow I had the pump flowed at hilborn and it was 6.55 @ 4000 with 100 psi. 1000 1.69 8 psi 1500 2.56 17 1800 3.00 20 2000 3.43 25 2500...
