Separate names with a comma.
or add some nitro Nitro is the answer for everything.........haha:D
I dont think 1000hp would be a problem. I totally agree with Dave, and its a fact, compression does wonderful things for alcohol, but it doesnt...
Gas sucks! Its definently not going to run worse with alky, and yes you can run way more boost with alky and 8 to 1 than gas. From what I...
Could you run -12 hoses, I have no real proof that -10s arnt enough but ive always plumbed my oil in -12 and had zero oil pressure problems.
Thats the way im going with it, the crank is going to get polished down a bit.
No luck I checked with good vibes and drew a blank and I called tom at Wizard he said they are not made anymore, looks like im gonna have my...
I run extra clearance rod bearings now, looking for mains, I will make some more calls.
Brads number is 502 821-9169
Does anyone know if there are +.001 or .002 clearance hemi main bearings out there. Im trying to get a little more clearance in the mains and...
To get a starting point for nozzles you need to know your pump flow, 36 degrees is asking for problems expecially with your 12.5-1 comp, I...
When I got my System 1 they told me to use the 70 micron filter just to make sure there wasnt a restriction in the filter.
You are talking intake opening point right, 34* btdc goin to 37* btdc should be advancing the cam timing by 3*. If im thinking right.
8.50 well do you have to get to the mall that fast?????
I have seen several street - strip blown cars setup for E-85. None of them were efi though. I have also heard the 85%-15% mix is very seldom...
Top lube will do the black streaks of amazing designs, if you use it that is. I think the dark stuff is belt debris, I run the purple belt and...
I will admit, I dont know much about a 4 link or how to get one to work. I will say launching a blown motor is alot different than a NA motor,...
Should I be more like .004 or .0045? I use the 2.200 rod pins if that makes a diference.
I like between .003 and .0035 for the mains and .0025 and .003 for the rods, I think alot of people build them looser and that works fine too if...
www.reactorproducts.com I am using a reactor flexplate on my KB-5 to powerglide.
Thank you, I havent seen those yet. Did you see the video I posted?
