Separate names with a comma.
O-rings Yes I agree completely, if you have the time, O-ring it and be done with leaks with no slimy stuff.
When my motor was NA injected we ran it at 14.5 to 1 and it ran pretty well. We also run an SBC in a FED at 13.0 to 1, I want to give it some more...
With a track like that I'd say you did pretty good, I didnt see any sticky at all. Without a decent track you wont see a good 60ft. If it was...
If its not O-ringed you cant run a flat copper gasket at all, there are several gaskets that work without O-rings, and should do fine for what you...
Your compression does seem a bit high, but in my opinion it should work fine with that low of boost. If those studs are 7/16" 100ft/lbs might...
What are you torquing your studs to? How much boost are you making? Is this an O-ring/flat copper setup or are you using the ICS gasket?
It does evaporate away, there is probably something better. Ive used WD-40 too.
Its a penatrating lube/rust prevenative, about like WD-40 but I think its better. I found it through a Caterpiller mechanic. Its hard to find...
I run a dry sump, different brand of tank. Early this year I was getting tons of oil in the puke tank, after some investigation we thought we...
We spray ours with Kroil it stops the fuzzies.
Way back when [ telling my age here] when no copperkote was around we would spray a thin coat of aluminum paint on both sides to seal with....
Not sure I am following this right but as I see it the only time you might let air ESCAPE from the motor would be on valve overlap. A small amount...
Thats a VERY good idea you have there. You ought to sell the tools. We have the CNCs to pump them out right here in our corn field.:D
Thats a proven fact, a better head makes less boost and more power.
I might start doing it now, I dont have enough travel in my adjusters, I have to take rockers off, but it still seems like a good idea.
Do you guys take your rockers off to let the valve springs relax between weekends? For me putting the rockers on is only about a 15 minute job,...
I run one of those, had some issues with it flexing alot. Im not sure if its tough enough for me. If this is a torque converter car too low of...
I use the 110 pump, no loop, .096 pill, gets me 130lbs fuel pressure with my nozzles. Im using a 28% over 871. I agree with SoDak big pumps are...
I wondered that myself and so far we havent ran 2 but there is a good video on YouTube showing some slow motion shots of a belt with and without...
I would think that setup should be good for at least 1400hp, now keeping it happy is gonna be your job. There are alot of high power cars out...
