Separate names with a comma.
Ok so here is a real dumb question if i run a dry system is there any way to measure engine temp to know if it gets to hot? or so i can warm it up...
this is no way a street car, how do you use the barrel valve to keep it cool? and will it be ok to use the water heads empty?
thinking about running a cooling system in my blown bbc door car 1500hp, any thoughts? pros or cons? any input would be welcome. have a filled...
blown alcohol door car 2600#'s
Stainless valves and 7000-8000 engine rpm max, 12-18% overdrive or what ever it takes to create 15-20 lbs boost
i have the comp shaft rockers for the RHS heads. I have the cam but i have seen alot of recommended spring pressures not be enough for blower...
Building my blown 540,dart block,aluminum RHS heads, 1471 BDS, 11:1 planning to run 20lbs max boost for now don't have exact cam specs but lift...
Hey Tavis i have gone through all the ideas for starting my new car, and came up with the idea of 2 batteries starting on 24 volts but still...
i plan on running a 4.25 stroke with 4.50 bore i haven't orderd the rotating assembly yet but i was leaning to a standard deck height and maybe...
I am building my first bbc blown alcohol motor am going to purchase a dart big m block should i use a tall or standard deck height and why? Thanks...
I am just looking at some options on building my first blown alky motor i have a few parts lying around and a few different options to build have...
Any thoughts on running a 477 ci bbc 4.50x3.75 combo? pros cons what rod length would be suggested with a tall deck block? any info would be...
my motor is the 4.5 bore 4.5 stroke, callies crank i just need to upgrade my rods and pistons as they were steel carrillo's and brc dished pistons...
Blower is an oddy's worked bds pie opening hi helix, heads are rhs 360cc runner nothing done to them cam is .652 lift with 1.7 was going to go 1.8...
the ones i got are identical to the ones from rpm with no porcelin talking to a good sales rep will get the right ones just my experience
www.omega.com out of Quebec is where i got a set very affordable about $40 each. just type thermocouple in there search bar and they are listed...
bbc advice Can any one suggest a good rotating package to run in a 4.5 bore 10.2 deck bbc to make a safe 1500hp or so i have a bowtie block,...
trying to figure out what application these rods may be used in as the length is a bit short, they measure 1.091 pin dia,2.497 journal dia,6.533...
If some one expects you to pay in full for a part before its shipped he is asking you to trust him 100% so why not pay 50% receive the part and...
does any one know if there is a rev limiter available to run with a mallory super mag iv? if so where can i get one? part # etc Thanks in advance...
