Separate names with a comma.
2 step ok what's the deal in TMD and TAFC is a 2 step or any other device allowed to use or not, we had a conversation here in Europe ( we need...
Hi thanks for the info,below are the specs but there's no way you can see what you need , you have a 50 % chance to get the right ones. If I look...
Hi I'm going to give it another try, I bought front wheels from weld racing for a strange spindle partn° 788 15001 but they don't fit. The info...
hi need the phone number from sprag technologies,the one i have is 515 576 4923 but no answer:confused: thanks danny
Will how many orders can you handle when you come over to Europe?:D danny
push rods Hi Wayne give manton a call they know most lengths used by other racers and are very helpful and can answer all your...
impact look here , it's over here also :( http://eurodragster.com/news/news.asp?Story=march20#march20 i need a new helmet for a alcohol...
Hi Guy's I will contact uncle bob;) thanks danny
where do you buy motorplates for a alcohol funnycar:confused: and the quick release rear body latch thanks danny:)
what grit stones is best for alcohol use and a good tip for installing the side seal on the rear main cap without problems on a bae forged...
seal hi jonas we have them and if you don't find the seal:mad: i give you 1 in mantorp see you there grtz danny
Hi Anybody knows this funnycar? It's on the racing junk site and looks ok but need info :) thanks for the help danny...
shouldn't they change the tad class to fuel dragsters? there are only 2 blown cars left @ Houston :confused: there are 2 guy's from Europe , one...
Hi there are going to be 2 racers from Europe on the gatornationals one in TF Urs Erbacher from Switzerland the European champion 2007 and one in...
hi it must and hope it will be Dave Wells ;) grtz danny
gear play Hi Ronny yes it's the vertical play i wanted to know;) and we can bring it down to zero no prob we checked the clearance on the oilpump...
distrib Hi Will we have the trigger set up but we have not run this engine yet:(. We have seen wear on the gear when we took it out off the...
distrib gear Hi Craig We bought a used bae engine with 30 runs on it since new,it's a forged bae block. The cam is not damaged but the bronze...
hi how match play needs to be between the distrib gear and the blok?we have .008 now but was .062 before and the gear was damaged after only 25...
on this helmet shroud problem instead of using steel or tit is it not possible to use the kevlar :confused: like on the trans blankets and blower...
