Separate names with a comma.
plug Stock Hemi wires came with a cover on the wires.To seal the tube. Don
hose contact Contact Race Car Solutions or McKinney. Look and act like right it is only a phone call away., and do it right the first time....
tubes Not that I know of. but put tape over then.
tubes Thanks Branden, Diversteck is only about 35 min. from me. talked to him last year. I honestly for- got about his tubes. I know the #1 funny...
tubes No it seems to get bast the o-rings when it gets good heat in it. When cold, it is fine. Don
I have a set of Williams valve covers for a fat head. Has anyone used the billet high dollar tubes?? Had some oil problems last year with the std....
looks like my guy would rather be @ the shore than race. 1 needs to be fun & want to win 2 can cut light without delay box. 3 experience...
O-rings Just was checking, years ago, use to get one piece one's from Conway. Don
t.stop Put it on and try it before you cut it. I didn't really need to do much on mine.They should open with it on. Then adjust to what RPM you...
Does anyone know if somebody makes a 1 piece. .210 O-ring for the PSI manifold plate? Thanks Don
hose The grey flat hose from goodyear. it doesn't stay real flat and is NHRA approved. IT is What you are suppose to run and is 90 PSI rated. But...
cyl. Hey Mike, No I don't have any picks, but it had a plug end like we use on a Leahey set up. And yes Hamstra and some other cars had the 4 stg...
Pro Extreme cars Hay Mike Just went to my first ADRL race this weekend. What are the 4 management cyl. bolted to the back of the injector's for?...
bearings You didn't tell us what they look like. Are you squeezing them, etc. How many runs ? I would say tune up. Don
2 step You have to do what makes you comfortable. no matter what anyone else is saying or doing. But you can take fuel away from the system if...
rear gears find the calculator that tells you all the info you will need. I am sure you can find something on line Try goggling things. And you...
lean out PSI shows it coming off a port on the fuel shut off. Also run a jet between a 40 and 80 depending how aggressive you want to be. set the...
What is the purpose of placing the 2 of the nozzles in the back of the injector. Asked before and no one had a good answer . Ran 2 up front the...
lean out You can run a N/O Whitney valve to the air line from the tower or the line from the 1/ 2 shift button. Look and see what your PSI book...
Flexplate i RUN THE 168 TOOTH BILLET ONE ON MY HEMI, cAN'T STOP TEARING UP THRUST BEARINGS. WITH .013 MIN END PLAY. Don
