Separate names with a comma.
Bryant Billet 4.5" stroke crank I have a Bryant 4.5" stroke, dual key way, used, but perfect, $1500.00 in TN Contact 931-580-8805 or...
Anyone got a shallow dragster pan for a BAE/KB style block that is no deeper than 5" in the front and 6" in the rear. Clearance has me from using...
2.4" intake valves & 2.0" exhaust valves The heads are complete with 2.4" intake valves & 2.00" exhaust valves-Thanks! Jim
Holly Blue Pump I have used a Holley Blue Pump for several years to pump out of my 55 gallon barrels. I run anything I can find after filling...
Complete, new Tom's 5.14 billet center section chunk, 9" Ford style, complete and set-up with 1350 yoke, ready to run. 10" ring gear, $3600.00...
Mark Williams complete center chunk with a 4.57 ratio gear, perfect condition, 1480 yoke, oil pump, complete ready to swap in the MW modular...
2 complete Veney top fuel dual plug heads, with valves, springs, retainers, locks, etc. Matching Ken Veney intake and will make great nostalgia...
Morose Dry Sump oil pan I have a Moroso dry sump oil pan, (fits KB or BAE hemi block), ready to ship, and it has a 110 volt Moroso heater...
Pan to oil pump suction line I had the same problem one weekend showing close to the same problem. My oil line was not the proper line or...
RBS Superchargers JR at RBS Superchargers got me 2 sleeves today, same as you need. I hope that helps you, Thanks, Jim in TN...
Bare early Top Fuel Style Heads I have 2 early top fuel style heads, bare for $1,000.00. Call 931-580-8804 or send to csmjimbkyle@bellsouth.net...
Beadlock Weld Wheels still wanted- Still looking for a set of Weld 16" Ultra-Lite beadlocks, last deal never showed up, need a 5" backspacing and...
8 new Brooks hemi B-2 rods, left over spares for one motor, 7.360 long, all other standard hemi specs, $750.00 for a set 8 and a used set of the...
10 new 3303-Pro GRP hemi rods, 7.046 long, 2.5" bore, all standard specs, 1.005 width, 1.156 PF, 1.400 pin width, $1200.00 for 10 rods, Thanks,...
16" Weld Beadlock Wheels Wanted Still need a set of Weld Ultra-Lite 16"X16" beadlocks with a 5" back spacing and need a 5"X5.5" bolt pattern, but...
Wanted 16" Weld Ultra Lite series wheels with 5" back spacing, need 5X5.5" bolt pattern, but can swap centers if needed. Please contact me at...
Other Centers? Does anyone know if any other centers (Weld, American, Bogart, ?) might fit with some machining? Thanks, Jim 931-580-8804 or...
Wanted, 16" X 16" beadlock 15 bolt Spinwerks wheel centers, 5 X 5.5" bolt pattern, slotted spoke look, please call Jim @ 931-580-8804 or send...
Wanted r980 or a980 Whipple Superchargers for rebuilding or parts, send pictures and price to csmjimbkyle@bellsouth.net or call 931-580-8804 in...
GRP rods I have been running GRP rods in a BAE blown hemi and very happy with them too! Thanks, Jim
