Separate names with a comma.
Expect 2 calls Dave. I made a motorplate a while back and had to use transfer punches to get the basic pattern and then went from there. I...
Roots trivia. Detroit Diesel was the benefactor, not the inventor of the roots. The Roots Brothers made the first ones out of wood in the 1850s to...
Eli is on the right course. All you need, from the sound of it, is a bearing separator and attach your puller to it. Borrow one.
As I stated in an earlier post I use a Wilton square wheel belt sander to do the notching....
This ebay ad has a video on it that shows that adapter I was talking about. It also shows the difference between hubcentric and lug centric,...
I have some of the Williams tools and all work well except the tubing notcher. I mean it works but not like what we need. I think you would be...
Say.... if anyone knows of one of those universal lugcentric adapters for tire balancers laying around somewhere, I would like to have one.
Band saw most of the time. Followed by fitting using a Wilton square belt sander. Followed sometimes by a rubber backed sanding tube of the...
I just wondered. I have to do mine off of the lugs. For some reason the floater hub flange is smaller (it's an old one) than the wheel hole by a...
Will, Do you mount off of the center hole or off of the lug nut holes? Dave Koehler
Clearance is fine as long as the skirts aren't collapsed. Coating the skirts will improve the skirt life and appearance. Change oil more often?...
Just ground the heads as stated and be done with it. .025 You will need a killer battery and/or an alternator Starter on 24 volts You will...
I'm with crashly. An alternator is a must with that box. Or a 20amp MSD mag. Dave Koehler http://www.koehlerinjection.com
.............................. Dave Koehler http://www.koehlerinjection.com
The spreading of the lifter body on the Chevy is common. This is going to sound a little shade tree but if there is no other damage/wear I...
I made some tooling for the anglia spindle wheels and do them on my balancing machine. Bubble or the static, spin, drop test works pretty well...
If you need one with Chevy BB mounts I have one. See it here, bottom of page....
Try this http://www.amazon.com/Chevrolet-Racing-Engine-Bill-Jenkins/dp/0931472016/ref=sr_11_1?ie=UTF8&qid=1231641045&sr=11-1 Dave Koehler
I guarantee if you drill the hole from the bottom, sooner or later it's going to split. Seen it several times. Pins are cheap.
Heap big double secret..;) Drill the pin from the journal side and use a tap. Screws it right out. 10-32 as I recall without looking. Dave...
