Separate names with a comma.
on board camera Just a copy of the note I sent with the petition. The onboard camera is a very good aid for driver training and I have used...
I've made three over the years two for a roots and one for a screw. It is a lot of work. Last one used a bolt on throttle body and made it easier...
Worked great for me when I ran beadlocks. Scott McVey
Greg They do make undersized crank gears for when you need to line bore the block. Check it against one of your old ones to be sure. "Dig a...
MSD does now sell the black caps. I had to paint my first one then ordered a new black one from MSD. As far as the black generators, no...
I ran Lucas 20/50 organic for three years with no problems.
With the 36" tire probably wanting 1.92 low gear with a 4.29 rear. The 34.5 tire can probably drop to a 1.89 low gear maybe less depends on how...
Didn't work for me I did exactly what you are thinking of with a 5" snout. Bolted pulley on backwards and it kept destroying the bearings in the...
hemi Have 525 KB for sale Man to pan. PM me for details or check the classified section, listed last week.
Anybody have contact info for Ed Cluff & Co. Flow Dynamics??? Thanx Scott
Thanx for the info.
Anybody have a phone # or Web info for Automan? Thanx Scott McVey
I have had this happen a couple of times in my alcohol funny car. It seems to happen to me if the burnout RPM is too low. You can try tightening...
I thought I read somewhere there was a loophole for getting aroung the commercial truck laws. Somebody mentioned horse racing as a hobby and I...
Call KB they have in stock.
Oil We run 20/50 Lucas with a quart of stabalizer. Works great, no bearing problems and worth a few HP. Scott
Unfortunately it is not a rule book error. When I spoke with Firefox about this they said they expire every two years. It gets better, To ship...
If you check the NHRA rule book at the back, page 271, where they list all the SFI specs they give a two year interval for re-certification on the...
We run a MSD converter for our datalogger, never had a problem with it.
The outlets on the barrell valve are a common feed, so the hi-speed takes fuel away from the whole system not just the port nozzles. Lets not...
