Separate names with a comma.
I bought some Arias heads a few weeks ago that has one chamber all beat up because it dropped a exhaust valve, and guess what kind of locks it...
If you could run all the fuel through the hat and get even distribution would be ideal. The fuel would help seal the blower and make more boost,...
The main brgs. that take the most abuse are number 2 and 3 because the combustion pressure pushing down on the crank and the blower drive pulley...
Many years ago I had about the same combo as you,just running hat nozzles in a big block chev. Try this- left side-front to back-60 70 60 57 right...
I agree with Will's method, but will bring it one step further. I set the Intake just as the exhaust is starting to open, and the exhaust as the...
Will is right, unless you know exactly what your pump is putting out you are just stabbing in the dark.
I knew a mudracer that had the fuel outlet on the front of the fuel tank. He would step on it and get about half way through the pit and the...
I read the article in the Dragster about the new fuel funny car frame specs.Do you wanna start betting on when the spec will be required in...
If a new rule is implemented in T/F, you can bet it will be required in TAD/TAFC in a year or two.
Ferrari ought to hire this guy! With that much passion for Ferrari, just think what he could do with the full size one.
When PSI first came out with their blower in '89 I think,Norm said that there wasn't a need to run much fuel through the blower, but soon found...
If the blower is for a pleasure boat, I wouldn't go to the trouble in restripping it as in ten minutes of use it will be in the same shape as when...
I was looking in the 2007 NHRA rule book to see what SFI rating the lower engine restraint had to be on a TA/FC, but could only find that it had...
I've had good luck with Remoil,-made by Remington fire arms to spray on your guns to protect them from rust. I think the Pledge deal sounds...
I had some problems with the B&J valve and ended up going to the local seal and bearing supply house and buying some buna o-rings with a harder...
What's an average clutch pac wear (in thousandths) with a 3 disc Crower clutch on 1 run.
I knew a guy that had a blown alchohol dragster that had a MSD 12 and had set the plugs at .025, then with no other changes other than changing...
I have worked on some Detroit Diesel 71 series engines that are made for the oil field work, they have a spring loaded flap on the inlet of the 71...
Both cams fire the same rod journal in sequence,twice,-4&3 and 5&6 for the standard and 7&8 and 5&6 for the 4-7 swap. The only difference between...
I don't know many guys who use a highspeed any more, but alot of people use pump loops ( from the outlet top of the fuel shutoff back to the...
